Engine diagnosis using direct reading iron spectrum analyzer with engine No external dynamometer and engine leak detector The only function of the engine is to generate power, engine failure is the most important performance is the power down, so the engine can measure the output rating Power is the most direct and effective way to understand the condition of an engine. In the past, the hydro-dynamometer and the dynamometer need to be disassembled and measured in the workshop. In recent years, various engine-developed dynamometers without external load can be quickly and conveniently removed without removing the engine Measure its power. There are many reasons for the decline in engine power, but many of them are improper adjustment, can be restored after a simple adjustment; if the piston, cylinder liner wear, you need to carry out large-scale repair. The use of engine leak detector can diagnose the piston, cylinder liner wear status. Normal power that the engine was not a big failure, but it is unknown whether there are hidden dangers. If there is dust or water intrusion, the load is too large or poor lubrication will occur abrasive wear, fatigue wear or adhesive wear, there will be a large number of abrasive particles generated, the engine will be in a very short period of time have serious problems. A direct reading spectrometer is the most sensitive, the cheapest, and the easiest to diagnose instrument for fluid (wear) analysis through the analysis of fluid (wear) to diagnose engine wear, wear, and wear. Hydraulic system diagnosis using direct reading iron spectrum analyzer with pressure gauge group, stopwatch and tape measure in the use of hydraulic construction machinery , because of its aging seal, the gradual wear and tear components, the internal leakage will gradually increase, the result is the machine action Become slow and weak, productivity is reduced, economic deterioration; Construction machinery boom or work device to maintain a certain level of reduced ability to lower safety. The use of stopwatch and tape measure construction machinery hydraulic components of the speed and settlement can determine whether the machine is working properly. If the machine is not moving at the proper speed or settlement, use a pressure gauge set and follow a series of logical analysis methods to find the fault location. If the machine's movement speed and settlement are normal, oil (wear) analysis should also be performed using a direct-reading ferrograph to determine if there is a potential problem with the hydraulic system. Drive system diagnosis using direct reading iron spectrum analyzer with impact pulse meter due to wear and tear, transmission gear gap increases, bearing raceway and rolling body surface spalling, the operation of the shell surface will produce periodic vibration and shock pulses, the use of vibration measurement Instrument or shock pulse meter can determine the transmission system failure; compared with the ordinary vibration diagnosis, shock pulse meter more simple and effective. Similarly, the use of direct reading iron spectrum analyzer on the transmission system of the lubricating oil (wear) analysis, you can determine whether there is a hidden fault transmission system. According to the above several parts of the degree of wear and tear can determine the technical status of the machine and repair range. At the same time, using the above direct reading iron spectrum analyzer, the engine without external dynamometer, engine leak detector, pressure gauge, stopwatch, tape measure, shock pulse meter and a set of diagnostic instruments and measuring tools can be easily and effectively To achieve the main part of construction machinery and fault diagnosis, in line with the requirements of economical and practical diagnostic instruments. Pet Chips Water Grade,Pet Potato Chips Water Grade,Brand Pet Chips,Brand Pet Bottle Grade Chips Jiangyin jietong international trade company , https://www.jietongpetresin.com