Xigong Chusheng Docking Garbage Truck is a special vehicle used for garbage transfer and unloading in urban garbage compression stations. The box body of the vehicle adopts the high-quality carbon steel plate sealed and welded structure, which has the advantages of high strength, light weight, and no secondary pollution. The following is the method of operation of garbage collectors of Xiagong Chusheng. Use an arrangement of multiple votive holders with our beeswax votives to create the perfect relaxing or romantic setting. Each handmade beeswax candle is hand crafted using a lead-free 100% cotton wick and lightly filtered 100% beeswax. Our 100% pure beeswax votive candles, like other traditional votives, are made to become molten and fill their container. To achieve the best results, burn inside a holder which fits the candle snugly. Using the proper holder, you can expect our best beeswax votives to burn for at least 15 hours, making them a great bang for your buck. Pure Beeswax Votive Candles, Beeswax Votives, Handmade Beeswax Candles Bulk, Long Lasting Beeswax Votive Candles Shijiazhuang Tabo Candles Sales Co., Ltd. , https://www.tabocandles.com
Before loading the garbage, when the no-load operation reaches 6 standard air pressure, hang the power take-off device (bottom left of the steering wheel in the cab) and check whether there is any leakage or abnormality in each component, and then operate according to the position indicated by the operation signboard; The steps are as follows:
1. Docking garbage loading: push the rear door operating handle to the open position, and the wall cylinders on the left and right sides of the box are extended so that the rear door of the box is first pushed out horizontally for a certain distance, and is turned up and opened, releasing the operating handle to make it back To the median. After the rear door is opened, the garbage truck is docked with the compression box door, and the garbage is pushed horizontally into the carriage from the compression box. After the garbage is loaded, the garbage truck is released from the docking state and the rear door operation handle is pushed to the closed position. The cylinders on both sides of the wall are retracted, the rear door is turned downwards, and finally the rear door is horizontally pulled back tightly, releasing the operating handle to return it to the neutral position.
Second, butt-type refuse dump: When the vehicle reaches 6 standard air pressures, the power take-off device is hung. After checking whether there are any leaks or abnormalities in each component, operate according to the position indicated by the operation signboard. Push the rear door operating handle to the open position, and the wallboard cylinders on the left and right sides of the box are extended, so that the rear door of the box is first pushed out horizontally for a certain distance and then turned up and opened; releasing the operating handle to the neutral position. Push the handle of the dumping operation to the raised position, the self-unloading cylinder extends, the garbage box body rotates around the turning shaft, the garbage box forms a dumping angle, the garbage is discharged from the box body, and the dumping operation handle is released to return it Median;
3. Xigong Gongchusheng docking garbage after unloading: push the dump handle to the falling position, the dump cylinder recovers, the garbage box rotates around the turning axis, and the garbage box is put back on the attached frame and released. Remove the operating handle to return it to neutral position. Push the rear door operating handle to the closed position, the wall cylinders on the left and right sides of the box are retracted, the rear door is turned downwards, and finally the rear door is horizontally pulled back tightly, releasing the operating handle to return to the neutral position. Loosen the power take-off bin and place it. The vehicle can be driven.