Now people's lives are getting better and better, and more and more people like to maintain their own vehicles. But some drivers too much to care for their vehicle, if he heard useful vehicle, it will not be dismissed immediately to their nursing sweeper vehicle do require proper way these sweeper maintenance mistakes that you did not?.    In fact, many wrong maintenance methods are being used by drivers, but drivers do not realize it. Here are just a few of the common mistakes for drivers. 　　 1. The tighter the bolt, the better. There are many fasteners connected to the road sweeper with bolts and nuts. It must be ensured that it has sufficient preload, but it cannot be tightened too tightly. If the tightening is too tight, the bolts and connectors will be permanently deformed, the pre-tightening force will drop, and even cause slipping or breaking. Road sweeper maintenance is an important way to guarantee the normal work of sweeper trucks and ensure their stable performance, thus prolonging their service life. If a sweeper truck maintenance goes into the wrong area, it will be self-defeating, resulting in mechanical damage or mechanical accidents. Therefore, paying attention to the maintenance of road sweepers is a very important task. Everyone can pay attention to these above in the maintenance of the sweeper. Now people's lives are getting better and better, and more and more people like to care for their own vehicles. However, some drivers are overly caring their own vehicles. As long as they have heard that they are useful for the car, they will immediately consider doing so to their own vehicles. In fact, many wrong maintenance methods are being used by drivers, but drivers do not realize it. Here are just a few of the common mistakes for drivers. 　　 1. The tighter the bolt, the better. There are many fasteners connected to the road sweeper with bolts and nuts. It must be ensured that it has sufficient preload, but it cannot be tightened too tightly. If the tightening is too tight, the bolts and connectors will be permanently deformed, the pre-tightening force will drop, and even cause slipping or breaking. 　　 2. The tighter the transmission belt, the better. If the belt is adjusted too tightly, it will be easily stretched and deformed, and the pulleys and bearings will easily cause bending and damage. 　　 3. The more the oil, the better. If the engine oil is too much, the crankshaft shank and the connecting rod will stir violently when the engine is working. This will not only increase the internal power loss of the engine, but also cause the increase of engine oil splashed on the cylinder wall. Row of oil failure. The oil is the aspect that should be paid attention to in the maintenance of the size of the sweeper. It is very important whether the quantity is determined or the quality is chosen. Road sweeper maintenance is an important way to guarantee the normal work of sweeper trucks and ensure their stable performance, thus prolonging their service life. If a sweeper vehicle maintenance goes into the wrong zone, it will be self-defeating, resulting in damage to the machine parts or mechanical accidents. Therefore, paying attention to the maintenance of road sweepers is a very important task. Everyone can pay attention to these above in the maintenance of the sweeper. C9 Hydrocarbon Resin,Rubber C9 Hydrocarbon Resin,Road Marking Paint C9 Hydrocarbon Resin,Hot Melt Adhesive C9 Hydrocarbon Resin Nanjing Jinshan Chemical Technology Co., Ltd , https://www.jinschem.com
2. The more the oil, the better. If the engine oil is too much, the crankshaft shank and the connecting rod will stir violently when the engine is working, which will not only increase the internal power loss of the engine, but also cause the increase of oil splashing on the cylinder wall, resulting in burning. Row of oil failure. Oil is the aspect that should be paid attention to in the maintenance of the size of the sweeper, whether it is the determination of quantity or the choice of quality is very important.
　　
3. The tighter the transmission belt, the better. If the transmission belt is adjusted too tightly, it is easy to stretch and deform, and the pulleys and bearings are liable to cause bending and damage.