5000bph Pet Plastic Bottle Making Machine Price 50kw with Extrusion Blow Molding 4000 * 2000 * 1950m

Product Introduction
1. Stable performance with advanced PLC.
2. Automatic preform conveyer to save human cost.
3. Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4. High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5. High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6. Introduce the FESTO air cylinder to avoid contamination and noise.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mould.
9. Two ways of operating: Automatic and manual.
10. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
11. Contamination is avoided for the bottle body.
12. Ideal effect of the chilling with the chilling system.
13. Easy installation and starting
14. Safereliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.

 

 

1. Low costhigh efficiencyeasy operation and maintenance, etc, profited from the fully automatic technological process.
2.Ideal cooling system make the finished bottles without any flaws.
3. Easy for you to installtest and start up.
4. Low rejection rate: Less than 0.2 percent.

Technical Parameter

Model	Item	PM-A2	PM-A4	PM-A6
Productivity	Depend on bottle design	1800-2000PCS/H	3200-4000PCS/H	4000-5500PCS/H
Product type	Volume	0.1-2.0L	0.1-2.0L	0.1-2.0L
	Body diameter	≤100mm	≤100mm	≤100mm
	Height	≤310mm	≤310mm	≤330mm
	Neck diameter	≤38mm	≤38mm	≤38mm
Mold	Cavity	2	4	6
	Mold thickness	240mm	240mm	240mm
	Mold volume	260*240*370mm	510*240*360mm	640*240*360mm
Main machine power	Electrical source power	380V/220V 50/60HZ	380V/220V 50/60HZ	380V/220V 50/60HZ
	Â	3Phase	3Phase	3Phase
	Rated power	25kw	49kw	73kw
	Really use power	6.5kw	13kw	25kw
Air system	HP air compressor	1.6m³/min3.0Mpa	3.0m³/min3.0Mpa	6.0m³/min3.0Mpa
	LP air compressor	1.0m³/min1.0Mpa	1.6m³/min1.0Mpa	2.0m³/min1.0Mpa
	Air tank	0.6m³3.0Mpa	0.6m³3.0Mpa	1.0m³3.0Mpa
	Air dryer	1.0m³/min3.0Mpa	2.0m³/min3.0Mpa	6.0m³/min3.0Mpa
Cooling water	Water Chiller	3HP	3HP	5HP
Machine	Size(L*W*H)	1900*1280*1930mm	1900*1860*1930mm	4100*1400*1800mm
	Weight	2000kg	3600kg	3200kg
Preform unscrambler	Size(L*W*H)	2000*950*2480mm	2000*950*2480mm	2000*950*2480mm
	Weight	250kg	250kg	250kg

 

Brand Name

Name	Brand	Original
Cylinder	SMC	Japan
Magnetic valve	SMC	Japan
Photoelectric switch	XINLV	CHINA
Touch screen	MCGS	CHINA
PLC	Mitsubishi	Japan
Transducer	SMC	Japan
servo motor	HUICHUANG	CHINA

FAQ
1.How to tell us your enquiry?
:You can contact us by email, phone call, fax, Instant Messenger (Trademanager, WhatsApp, Skype) and let us know your requirement.
2.Are you manufacturer or trading company ?
We are industrial manufacturer, which locates in Zhangjiagang city over 18years .
3.Where is your factory?
Our Factory is located in Zhangjiagang City, it is very near to Shanghai and Wuxi (airplame and train both available). If you arrive at Shanghai or Wuxi, we can pick you up to visit our factory.
4. Do you have any technical supports with your Beverage Filling Machines?
Yes, We have a professional team of engineers who owned many installation, debug and training experiences abroad, are available to service machinery overseas.

We Warmly Welcome Customers All Over The World To Our Company.If You Have Interests In Our Products. Please Contact Us If You Have Any Problems.

 

Gold-loaded Carbon Desorption

Above-mentioned equipment was successfully developed by Changchun Gold Research Institute in 1998. It has possessed three patents and five monopolized technologies. Desorption solution does not contain sodium cyanide, it can reduce the grade of barren carbon down to 100g/t. The key technology of this equipment is that it can ensure the balance of metal quantity, and avoids gold- accumulating and gold- floating from the equipment, ensures the technological index steady and low cost of it. The content about technological advantages has been broadcasted by Xing Huo Science and Technology of CCTV. This technology was appointed as the energy-saving technology of gold production by National Development and Reform Committee in 2006, and was also appointed as standard equipment in the industry by National Development and Reform Committee in 2007, it passed the technique identifying in 2003, and won the second award of science and technology of China National gold Association, the entire technical level is advanced at home. This equipment has won three patent rights of China. The patent numbers of it are separately: 01241537.5 01241538.5 200620029209.1

Gold Desorption,Fine Gold Separator,Gold Production Process,Gold Refinery Processing Plant

Changchun Gold Research Institute Co.LTD , https://www.changchunmachine.com