The abrasion of the upper and lower end surfaces of the piston ring of the swing arm garbage truck engine is mainly due to the hard residue in the engine oil of the garbage truck and the mechanical grinding formed on the upper and lower end surfaces of the dust particles mixed in from the atmosphere, and is essentially abrasive wear. However, when the abnormal thermal deformation of the piston of the swing arm garbage truck engine occurs and the ring groove backlash becomes small, melt wear may also occur. Xiagong Chusheng sanitation garbage truck manufacturers all kinds of garbage trucks, such as swing arm garbage truck, pull arm garbage truck, sealed garbage truck, docking garbage truck, compressed garbage truck and other details Consultation: Manager Liu 15672994333 Â Â Â Â Â Â
Construction Hoist parts including Construction Hoist Mast Section , passenger hoist wall tie, Passenger Hoist Cage and other Hoist Steel Structure Parts. Construction Hoist Safety Device and Hoist Electrical Parts . BQ's construction hoist has the same design with Gjj construction hoist.
Some common spare parts for a passenger hoist include: Construction Hoist Mast,Construction Hoist Spare Parts,Construction Building Hoist,Construction Elevator,Safety Device SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytoplesstowercrane.com
1. Wire Rope : Used for lifting and lowering the hoist cage.
2. Safety devices: Including limit switches, overload sensors, and emergency stop buttons.
3. Electric motor: Powers the hoist system.
4. Brake system: Ensures the hoist cage remains stationary when not in use.
5. Control panel: Controls the operation of the hoist, including the direction and speed of movement.
6. Gearbox: Transfers power from the motor to the wire ropes.
7. Bearings: Used to reduce friction and ensure smooth operation.
8. Electrical components: Such as relays, contactors, and fuses.
9. Hoist ropes: Used for manual operation or as a backup for the wire ropes.
10. Cabin doors: Including door rollers, hinges, and locks.
It is important to consult the manufacturer or a professional technician to ensure you purchase the correct spare parts for your specific passenger hoist model.
Sanitation Garbage Truck, Swing Arm Garbage Engine Maintenance
Xiagong Chusheng Special Purpose Vehicle Manufacturing Co., Ltd. Garbage truck manufacturers reminded us that we must first understand the working conditions of the swing arm garbage truck engine before we can maintain its important parts, especially the piston ring in the swing arm garbage truck engine. Generally, the sliding surface of the piston ring of the general garbage truck engine is most likely to wear out at the top dead center position of the cylinder. This is because the piston ring in the swing arm garbage truck engine under this condition breaks its oil film under the effect of high temperature gas and appears easy to melt. This speeds up the wear of the piston rings in the arm dump truck engine.