The intelligent light incubator is controlled by a computer and has four functions of light illumination incubator, such as illumination, hot and cold constant temperature, day and night automatic switching program control and over temperature protection. The intelligent light incubator was designed according to the “International Seed Inspection Regulations of 1993†and was produced in accordance with the relevant requirements of the national industry standard JB/T6823 “Technical conditions for biological artificial climate chambersâ€. Full compliance with various national requirements, it is now widely used in seed germination, nursery, microbial culture, insects and small animals. Compared with artificial climate incubators, smart light incubators are slightly inferior to humidity control, and other functions are far more than those of artificial climate incubators.
Thermal Handheld inkjet printer adopt HP TIJ2.5 technology, printing height is can be 1.5mm to 25.4mm,it can be use as handheld inkejt printer, and continuous inkjet printer if add extra lead rail and sensor, printing resolution up to 600dpi
HAE Inkjet Coding Machine adopt sealed ink cartridge, avoid ink ink pollution,and complex experiment and adjustment, it is maintenance-free, multifunctional.
Continuous Inkjet Printer,Rotary Inkjet Printer,Date Inkjet Printer,Chinese Inkjet Printer,Thermal Inkjet Printer,Handheld Inkjet Printer Wuhan HAE Technology Co., Ltd. , https://www.whwallprinter.com
Intelligent light incubator box body has a top cover, studio, cooling and heating room and bottom room and other four parts. The top cover is equipped with a computer controller, and the top cover panel is equipped with a digital display, indicator lights and operating switches. The two sides of the top cover are respectively equipped with fluorescent sockets, and the studio has three hollow glass structures. The cooling and heating are under the studio, and the left and right sides are respectively connected with the entrances and exits of the ventilation passages in the studio. The interior is equipped with an evaporator, an electric heater and two circulating fans to supply heat or cooling to the studio. The bottom chamber is equipped with compressors, condensers, cooling fans, instrument entry junction boxes and fuses. Intelligent lighting incubator the biggest advantage is to be able to intelligent control of light and temperature, such as you can freely set the time of day and night, how much, in addition, how much light during the day, the night is how much light and so on. These are our own settings. However, compared to the artificial climate box, it has a small drawback that it cannot control the humidity. The light incubator can adjust the temperature, light level, and operating time, but it does not have a humidity control function, so if you need to adjust the humidity, we recommend choosing an artificial climate box.
Intelligent light incubator parameter setting steps:
1. After the intelligent light incubator is powered on, press and hold the lighting key first. After about 3 seconds, the Addr is displayed in the time window. The light incubator enters the system setting, and then the set query key is pressed. The time window shows tc. The temperature correction value is displayed, and the user can modify it according to the actual situation through the plus and minus keys under the temperature window. Press the setup query button again to exit the system setup state and enter the operating state. Before leaving the factory, the system parameters are generally set to Addr=1, tc=0.0.
2. Set search key, each display window number flashes, daytime indicator light, this time can set the daytime running parameters: Press 1 plus 1 key to set the control time, until the time indication window shows "8"; press plus 2 minus 2 keys to set Temperature, until the temperature indicator shows “25â€Â°C; press 3 plus 3 to set the illuminance until the indicator window shows “80â€%.
3. Press the setting query button again to enter the night setting. The night indicator is on. The setting procedure is similar to step 1.
4. Press the setting query button again, the setting is completed, the operation state is returned to, and the incubator runs cyclically according to the set parameters. 