Spring Cone Crusher Parts,Cone Crusher Socket Liner,Cone Crusher Spare Parts,Cone Crusher Spare Parts Countershaft Assembly ShenYang TianYi Mining Machinery Co., Ltd , https://www.tianyimining.com
This tire is used for 900 tons of flat-plate flat tires, which is mainly used for high-speed railways and highway bridges when constructing bridges. The tire is required to have a high load capacity, a lower ground pressure ratio, and a greater torque effect. The tire uses high-strength nylon-66 dipped cord fabric as the skeleton material, multi-wheel structure, strong and durable carcass, strong load capacity; reinforced bead design to withstand the torque of the bead when the beam steering point steering Reduce carcass deformation. The tire design surface is designed to be wider and the groove ratio is smaller to increase the ground contact area and reduce the ground pressure ratio of the tire, thereby effectively reducing the pressure on the roadbed and bridge when the vehicle is under high load. The tread adopts the super wear-resistant, cut-resistant engineering tire tread rubber formula, which enables the tire to have superior resistance to cutting, abrasion and puncture resistance, so as to increase the service life of the tire.
Aeolos succeeded in developing tires for special engineering machinery
At the end of May 2006, Fengshen successfully developed 26.5-25-40PR (L-3/G-32) SUPER CARRIER SERVICE tires for construction machinery, and the company added new specifications to the individualized construction machinery tires. . The tire has a standard rim of 22.00/3.0. After the new tire is inflated, the section width is 675mm±3.5%. After inflation, the outer diameter is 1750mm±1.5%. At a speed of 10km/h and a pressure of 700kpa, the load is 19,600kg.
Related news: Tires