The so-called annual inspection means that each vehicle that has obtained a formal number plate and a driving permit must go to the vehicle management office every year for an inspection. In the daily car, most car drivers do not seem to be particularly concerned about annual inspections. Sometimes even for a long period of time, they do not even think of an annual inspection of the car. When I think of it, I'm afraid that the time expired and the auto inspection is too troublesome? In fact, Xiao Bian wants to tell drivers that it is particularly easy even if it is overdue. Please see the following methods:

First, the information required for automobile inspection

1. It is necessary to have a valid tax payment or tax exemption certificate for this year's vehicle and ship. The taxation or tax exemption certificate for a vehicle or ship tax is the same as the requirement for a compulsory insurance policy, and it is also required to provide the original for verification during the validity period.

2. I need to use my identity card in the process of processing, so I must submit my original ID card. If other agents help to apply, this situation requires not only the agent's ID card, but also a written power of attorney signed by the motor vehicle owner. Do not forget the power of attorney. Without a power of attorney, even if other materials are ready, they must not be handled.

3. The original “Motor Vehicle Driving Permit” has an inspection record column on the secondary page of the driving permit. From here, you can clearly understand the vehicle's annual inspection status, including the annual inspection time, the number of annual inspections, and other information. Through this information, vehicle management staff can check the annual inspection of the vehicle. The original "Motor Vehicle Driving Permit" can help the staff to confirm all the information to detect the vehicle.

4. The effective original motor vehicle traffic accident liability compulsory insurance policy for the current year is within the scope of validity. The public security department will leave the original at the time of processing. Even if the annual inspection expires for half a year, you must take this year's insurance policy to handle.

Second, the first step to make an appointment

There are two types of appointments for the annual review: one for telephone appointments and the other for online appointments. Either way, you must make an appointment in advance. If you do not have an appointment, it is equal to going.

1. When making a telephone appointment, the mobile subscriber dials 12580, and Unicom dials 116114, and then operates according to the manual service voice prompt.

2. On-line booking is logged on to the homepage of the annual review of motor vehicles at the Vehicle Administration Office of Guangzhou Public Security Bureau. After opening and entering, fill out all required items, and then make an appointment to wait for a reply.

Three, a piece of paper to get everything

According to the scheduled time to the designated vehicle management office, fill out the motor vehicle inspection mark application form, and wait for the number to be processed. Before you go, be sure to bring your original, original driving permit, compulsory insurance, and travel tax documents. If you are the agent, you must bring the agent's ID card and proxy certificate. In the process of doing more than just a hand, receive a free application form.

Postscript: After the expired annual inspection, as long as all the information is ready in the early stage, the process is very quick and convenient. However, once the annual inspection of the automobile expires, accidents will cause trouble. Therefore, the owner of the vehicle is still inspected on the basis of the prescribed time, and he must be careful to drive for 10,000 years.

Non Woven Fabric

FY-hengfa nonwoven Fabric series: PET Polyester Spunbond Non woven, Meltblown Nonwoven, Activated Carbon Nonwoven Fabric, Nonwoven Filter Bag,Nonwoven Fabric For Auto Filter.

Such as:

100% PET/PP spunbond nonwoven fabric.

It is similar to filament yarn production. From the chips storage, the polymer is vacuum-fed to a dosing station on top of the extruder. Inside the extruder, it becomes melted and homogenized. Passing a filter system and a spin pump, the melt is fed into the spin beam or spinnerets, which form a curtain of filaments. The filaments are cooled by means of a stream of air in a blowing area, drawn by aerodynamic forces and then transported to the downstream discharge channel. For nonwovens, instead of a further stretching process for filament yarns, the filaments are swirled around and then deposited on the wire mesh belt as a random nonwoven. This web is transferred to a bonding calender that uses heat and pressure to set such physical properties as tensile strength and elongation of the final product. After cooling, the material can be wound.  

 Product :Spun-bonded Nonwoven

Material :100% polyester

Width :0.15-3.20m.

Specification:1000M-4500M/roll or customized

Weight :10gsm-260gsm

Use :

1. Medical : face mask ,surgical cloth ,bedsheet ,disposable    cap , shoose cover .

2. Packing : shopping bag , tablecloth ,wallpaper ,compund packing material .

3. home textile : pillow case ,mattress cover ,linling .

4. Industry : protect the crop from insect .cold weather .filtration materials 

Non Woven Fabric

Non Woven Fabric,Pet Non Woven Fabric,Activated Carbon Nonwoven Fabric

Hebei Fangyu Trade Co., Ltd. , https://www.filtersmaterial.com