How to improve the efficiency of the lifting garbage truck

Hoisting garbage trucks are commonly used garbage trucks for urban waste treatment. They have a large capacity and can meet the requirements for handling and transporting large amounts of garbage. The compartments of such vehicles are relatively large and require manual assistance to complete the shipment when the garbage is loaded. This has certain difficulties in operation. So how can we improve the efficiency of shipping garbage? Think from the following aspects.

First, be familiar with the basic operations of lifting garbage trucks. The control of the lifting type garbage truck through the hydraulic system can lift the vehicle body during the loading and unloading of the garbage, and requires skillful operation for the height control and how to uninstall. Similar to automatic dump trucks, it is critical to the operation and control of the vehicle. On the one hand, it is necessary to ensure the safety of the loading and unloading process, and the other is the accuracy of operations, such as lifting the angle of the garbage when loading and unloading a bit more gentle, so as to prevent the garbage from falling off, when the unloading to raise the point of view than the time of shipment Some, but not too large, otherwise it is prone to rollovers.

Second, it is necessary to do a good job when shipping garbage. The process of loading and unloading rubbish usually requires many people to complete the operation. There are people in the cab who are responsible for the operation of the system. Some people are responsible for commanding the outside of the cab. Some people are responsible for putting the working equipment in a certain position. The entire operation process needs everyone to have good cooperation. Do your job better. Due to the large amount of waste loading and shipping, it is easy to drop during the process of shipment. Therefore, it is necessary to cooperate with each other to ensure that the garbage is safely and efficiently transported into the compartment.

Third, the use of hoisting garbage truck should pay attention to the safety of operation. Hoisting garbage trucks belong to large-scale special vehicles and have operating systems and working equipment to jointly complete the transfer and unloading of garbage. The operator operates the system in the cab and can see the subsequent operation through the monitoring device. For novice operators, continuous practice is required to master the process of operation. At the same time, attention must be paid to observing the surrounding environment during operation to ensure the safety of other workers.

Oil Seal is a mechanical components that used to seal oil (oil is the most common transmission system liquid material), It`s isolated the lubricated components with other components, not let the lubricate oil leakage. 

Oil Seal is generally divided into single-type and assembly type, assembly type is the skeleton and lip material can be free combination, generally used for special oil seals.

Oil seal can have different names, customary general rotary axis lip seal called oil seal, the static seal and dynamic seal (general reciprocating motion) was called seal parts.

The representative form of oil seal is TC type, is a double lips oil seal with a fully rubber coated and garter spring, generally speaking oil seal refers to TC skeleton oil seal, skeleton oil seal diagram see Figure:

Oil Seal

Oil Seal,Silicone Rubber Oil Seal,TC Oil Seal,Valve Stem Oil Seal

HAFID INTERNATIONAL LIMITED , https://www.hapgasket.com