Things to know when traveling in a car

Traveling Car Notes:

1. The water supply system in the RV is a very important part. If it is used inadvertently, it will cause harm to people's health. The new RV should only be used when it is used. It is necessary to clean and sterilize the drinking water system. Ready to work. After that, it is necessary to do a good job of disinfecting the vehicle when the vehicle reaches 5,000 kilometers.

2, before preparing to travel, be sure to have all the necessary equipment are ready, be sure to fill the mailbox and the tank is full, the most important thing is to check the safety of the gas on the car to see if there is a leakage The condition of the gas.

3, when the vehicle is in the process of driving, do not arbitrarily move in the car, if the bed is a bunk, it is best not to sleep in the upper store position. Stacked items must be fixed work to avoid the situation of bumpy roads.

4. When you arrive at the camping site, you need to park the RV first, then install the water and electricity and wastewater pipes, and finally start preparing personal use equipment.

Travel car preparation equipment:

1. The basic facilities of a RV should include refrigerators, beds, microwave ovens, gas stoves, toilets, etc. so that they can make a delicious meal on the way.

2. The space and beds in the car are also limited. To ensure that there are enough places for rest, it is best to equip a tent that can be camped.

3. In order to ensure the safety of driving, please do not talk about the refrigeration of the vehicle-mounted refrigerator during the driving of the resident car, and use the independent generator for cooling after reaching the destination.

4, before going out, be sure to check the toilet flusher to ensure that there is no water leakage in the tank. After using the toilet, it must be washed in a timely manner, because the space inside the vehicle is limited and it will avoid odor.

5, if you want to take a bath, it is best to park the car in a place where there is an outside source of water, so that it can supply a sufficient amount of water. If the water used in the campsite is not very convenient, and the capacity in the car's independent water tank is limited, water must be saved.

   Roller Shutter Roll Forming Machine is high-efficient mould changing model machine, which is suitable for metal sheet.The Roller Shutter Door Roll Forming Machine is widely used in various industries, especially in the line of metal sheet manufacturing in small deal but in various hole-punching forming.
   This machine is fully automatic and it is easy to operate to form shutter slats. It consists of one decoiler, sheet guiding equipment, roll forming section, PLC control system, Hydraulic cutting and collection table. 

Specifications:

Decoiler - Feeding guide - Main roll forming machine - PLC control system - Hydraulic cutting - Collection table

Pictures for machine:

Training and Installation :
1. We offer installation service local in paid, reasonable charge. 
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation. 


Certification and after service:
1. Match the technology standard, ISO producing certification 
2. CE certification 
3. 12 months warranty since the delivery. Board. 


Our advantages:
1. Short delivery period. 
2. Effective communication 
3. Interface customized. 

Roller Shutter Roll Forming Machine

Roller Shutter Roll Forming Machine,Pu Roller Shutter Roll Forming Machine,Plc Roller Shutter Roll Forming Machine,Hydraulic Roller Shutter Roll Forming Machine,Roller Shutter Door Roll Forming Machine

YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn