Hook-mounted garbage trucks also need to innovate Sanya's "no-container" garbage collection

Hook-up garbage trucks have been in the limelight in the collection and transportation of sanitation garbage in recent years. Because of its comfortable driving, convenient loading and unloading, low input and low maintenance costs, and a large litter box, it is favored by the majority of environmental sanitation workers. Recently, however, there have been news that Sanya is about to eliminate hook-type garbage trucks and instead use the traditional garbage bin + rear-loading garbage truck. The specific contents of the news report are as follows:

How can garbage be collected after there are no rubbish bins and rubbish bins on the street? There is a new way of “non-container” rubbish collection and transportation! It is understood that Sanya is currently planning to develop a “non-container” garbage collection and transportation mode, Jiefang Road and Fenghuang Road in the urban area. The rubbish collection hook arm boxes placed on 8 main streets such as Sanya Bay Road will be moved into concealed locations or used in neighboring communities. If there is no community where the garbage collection hook arm box is placed, a suitable bucket plastic bin should be set up in a “bucket-by-box” manner, and seamlessly docked and then transported by the bucket garbage compactor.

Feng Benchao, director of the Tianya Sanitation Institute in Sanya, introduced that the existing waste collection and transportation methods not only affect the urban landscape, but also because of the poor sealing of the collection equipment, the garbage is exposed, the smell is unpleasant, and the odors and noises during the collection affect the surrounding living environment. Sub-pollution is a major uncoordinated factor in the "two cities" and "double cultivation". After the renovation, the original 138 garbage collection points, 177 hook-arm boxes and 140 carts will disappear from the streets. Instead, there are three new modes of collection and transportation.

It is understood that after the implementation of the new mode of transport, the garbage collection service will be adopted. The sanitation department will arrange special personnel to use the three-wheeled electric garbage collection vehicles to collect street-level rubbish on a regular basis and increase the number of collections. On the other hand, 8 tons or 3 tons of compression vehicles are used to enter the community for transportation. To this end, Sanya City will invest more than 10 million yuan, adding 3,000 new plastic waste bins, 22 back-loading buckets of garbage compression trucks and a batch of three-wheeled electric garbage collection vehicles and other environmental sanitation equipment.

In addition, 19 public walkways occupying the sidewalks on the 8 main roads of Phoenix Road, Yingbin Road, Sanya Bay Road and Jiefang Road will be relocated or demolished. At the same time, government subsidies have been adopted to encourage public toilets in large shopping malls, hotels, hotels, and hospitals along the street to be open to the public.

As a garbage truck manufacturer, it is not only the production of hook-type garbage trucks, but also the production of rear-mounted compression garbage trucks and side-loading garbage trucks. It is supposed that there is no need to control what kind of car the user likes to use. However, the above news reports made me think that this decision is not rigorous.

Director Feng believes that the collection and transportation methods of hook-arm garbage trucks affect the appearance of the city, and the poor sealing performance of the equipment causes garbage to be exposed and the smell is unpleasant. When collected, foul odors and noise affect the surrounding living environment and cause secondary pollution. I think this is not a problem with hook-type garbage trucks, but it is a matter of maintenance. The small trash bin of the hook-type garbage truck is 10 times larger than the trash can. The door opening method can be designed to be automatically closed according to the user's needs to prevent the pollution of the open-air odor of the garbage. Sealing can be added as required under the recovery tank. Aesthetics Nowadays, some tourist cities have implemented paintings on rubbish bins, or stickers and environmental similar 3D stickers to integrate with the environment. Even if it is just a simple spray, as long as the color is properly matched, visitors can also be conspicuously located to find the location of the rubbish bin. It does not conflict with the environment.

The noise during the collection and transportation of garbage is unavoidable, but the noise of the rear-mounted compression garbage truck is even greater. For the hook-type garbage truck, the small gasoline-powered garbage truck is currently used in the city, and the noise is smaller than that of diesel vehicles. And there have been mass production of pure-electric new energy pure electric hook arm garbage trucks, and other electric vehicles driven by lead-acid batteries are countless. This comparison point of view. It is undoubtedly a retrogression to collect and transport rubbish by replacing it with a combination of a compression-type garbage truck and a trash can.

As for the collection and transportation of rubbish, it is a development trend: only daily for a certain period of time to collect and transport, residential areas only set up a small number of trash bins for passersby to throw away rubbish, household rubbish on their own at home, picking up and packing, specify Garbage trucks come to the door for uniform collection and transportation. But this way of collection and transportation has nothing to do with what type of garbage truck. I must not only ask that after the renovation, the original 138 garbage collection points, 177 hook-arm boxes and 140 handcarts will disappear from the streets. Where did you go after disappearing? This so-called "new way of collection and transportation" is actually the way most cities use many years of collection and transportation. The new input of more than 10 million yuan, the addition of 3,000 new garbage plastic bins, 22 back-loaded bin garbage compression vehicles, and a group of three-wheeled electric garbage collection vehicles and other sanitation new equipment may have a greater role in expanding domestic demand.

The city must choose the appropriate garbage removal equipment and cleaning methods according to its own actual conditions. But in the process, you can't think of the brain. Instead, we must constantly find problems and solve problems. Use as little investment as possible and deal with garbage more efficiently. Because the environmental issue itself is a very large investment, it is necessary to spend it on the edge. It is necessary to continue to invest in and profoundly change the way and habits of handling waste in order to gradually improve the environment.

[Garbage Truck Manufacturers]: Hubei Runli Special Purpose Vehicle Co., Ltd.

[URL]: http://

[Phone QQ & V letter]: Manager Wang 13908662884

Living garbage disposal equipment

With the development of increasingly urbanization , the amount of garbage increased geometrically. Incineration method gradually lost the market since the dioxin and toxic produced by incineration causing irreversible effects on the environment, and for landfill, some garbage is difficult to degrade, which even takes hundreds of years, we cannot afford this even though China has a vast territory, because land is a valuable non renewable resources.

After continuous efforts, Shangqiu Jinpeng industrial Co., Ltd developed a special biomass pyrolysis equipment for domestic waste treatment. After treatment by the equipment, can get about 20% of the oil profits from domestic waste, and in the process, through the low temperature anaerobic biomass pyrolysis of domestic waste harmless treatment, to ensure environmental health.

Flow chart for living garbage disposal equipment

Living garbage disposal equipment has two system:

1. Garbage Sorting System

The equipment is applied to separate organic waste and inorganic waste from large-size refuse and processing them separately.

2. Biomass Pyrolysis Equipment

2.1 The combustible waste after sorting and shredding such as life rubber, plastics and knitted fabrics is conveyed into the low-temperature and anaerobic biomass decomposing processor. Through catalyzing and heating, oil gas is produced and then condensed into oil mixture by condenser. The remaining that can`t be liquefied is processed through gas purification system and then used to generate electricity by gas generator. The smoke after burning goes into smoke scrubbers so as to remove acid gas and dust, and then is discharged through chimney when it reaches relevant environmental standards. The residue from biomass decomposition is conveyed into carbon black collecting tanks through sealed screw, without any pollution.

2.2  The technical parameter of Biomass Pyrolysis Equipment

Living Garbage Processing Equipment

Municipal Waste Recycling,Garbage Recycling Machine,Waste To Energy

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com