Why do we say that the cleaner needs better maintenance of the secondary engine when using the mixing station? Because the frequency of using sweepers in the mixing station is relatively high, and the area for sweeping is also relatively large. If some dust, particles, and dust accumulate, I think it should be more than that of domestic garbage. When a sweeper is used in such an environment, the air filter of the sub-engine is relatively easy to suck in the dust, which may cause clogging. The most serious consequence is the possibility of pulling cylinders. For other parts, the parts will not be cleaned because of long-term dust accumulation, and their consumption is faster than the consumption of the sweeper used in other environments. Therefore, the sweeper used in the mixing station should have shorter cycle time for the secondary engine. What are the more common breakdowns of the secondary engine of the sweeper? Â 1. If the auxiliary engine of the sweeper has a relatively low oil pressure. The value in the oil pressure gauge displayed on the dashboard can be used for better confirmation. If the oil pressure is too low, although it will not achieve the need for a large modification of the engine, but this is an important reference value. Â 2. The secondary engine of the sweeper will often experience a drop in the pressure value of the cylinder. If the degree of lubrication between the various parts of the engine of the vehicle is good, there is no leakage between the pressure gauge and the joint, and the speed of the engine is able to meet the relevant requirements of the number of revolutions, The cylinder pressure test, if it is less than 70% of the standard pressure value, then the sweeper's engine needs to go to the repair shop for a big repair. Â 3. The secondary engine will have a relatively large amount of fuel consumption. If the degree of engine oil consumption is already up to one liter of mileage, it will be less than forty percent when the new vehicle is used. That is, the loss of engine oil is more than one-hundred and fifty percent of the time the new car was cleaned . This proves that the amount of oil consumed is excessive, and it is necessary to carry out major repairs.
Long Span Roll Forming Machine , this part
is mainly developed for Russian market. Actually there is no too
much difference with other roofing sheet roll forming machines. Here the
drawing and types are very popular in market. For customers who like
type , the machines here are perfect and easy for you.
Long Span Roll Forming Machine Arching Roof Panel Roll Forming Machine, No Beam Roof Tile Machine,Roof Span Curving Machine Zhongtuo Roll Forming Machinery Co., ltd , https://www.rollsformingmachines.com