Industrial 3D Printers/Sand 3D Printers/Binder Jetting Additive Manufacturing Guangdong Fenghua Zhuoli Technology Co., Ltd , https://www.fhzl3dpequip.com
Flush bottom valves with disc opening into the tank or opening upwards is the most commonly used. It is used where enough space is available between bottom pad and the starrier of the tank. The mass load inside the tank helps closing & tight shut off the flush bottom valve.
Key Features and Benefits
1.Unique design of QS flush bottom valves assure "Zero- Hold Up" in the bottom pad of the tank. And facilitate the free flow and quick discharge of the liquid or slurry through the valves.
2.Casted and fabricated in all available metallurgy, Carbon Steel, S.S 304, S.S 316, S.S 304L, S.S 316L, Alloy 20, Hast alloy and as per special specifications.
3.Conical Metal to Metal disc seating with option of fixed or Renewable seat. Further metal seating can be hard faced by Stellite TM where distortion of seat by aggressive liquid or slurry is common.
4.Valves available in the size range of 15 NB to 250 NB in BS, ANSI & DIN standards.
5.Available in the design of Jacketed, Actuated & Lined.
6.Offered for Sanitaryaseptic application.
7.Outlet discharge angle available in 45 degree and can also be tailored made to 60 degree.
8.QS Y Type Flush Bottom vales can also be provided with the temperature sensors to measure the temperature in the vessel.
9.Bolted Stuffing Box (Gland), easily adjustable & with Repackable service.
10.Rinsing & Non Rinsing stem with outside ACME thread.
Specification :
Size :DN50~DN400Â Â Â Â 2 inch -14 inch
Pressure: 1.6MPa~2.0 MPa  Classs 150
Material : WCB CF8M
Â
Application
Coal chemical industry
Chemical industry
Alumina industryÂ
Â
Y Type Flush Bottom Valve
Model NO.: QsFb545Y-150
Stem Thread Position: Outside Screw Stem Globe Valve
Application: Forged Steel Globe Valve, Bellows Globe Valve
Standard: DIN, GB, ANSI
Trademark: Quanshun
Transport Package: Plywood
Specification: DIN
Origin: China
HS Code: 8481100001
"Y" TYPE Flush Bottom Valves are used to discharge Liquids &Slurry from the bottom of Reactors, Receivers & huge Tanks. "QS" Flush Bottom valves are available in design of Disc opening into the Tank ( vessel opening design) & Disc lowering (inside valve opening design) into the valve body.