Flexible lift gate is a flexibel soft curtain door, inside and outside the two curtains , curtains used between the aluminum beams connected with a vertically movable rail , the roof beams have levels not in the same straight line and hanger large plants in particular Be applicable , Flexible lift door installation does not take up interior space in the hole inside , When the first move to open the door , and finally superimposed over the hole , Off event curtain rail first and then fall down until its is completely closed
Door body composition :
The bottom of the door curtain rail aluminum beam beam seal top drive system and transmission of electrical control systems and safety devices
Flexible door features:
1. Light weight compared with other types of the same size door , flexible door lighter weight reduces the strength of steel at the top of the doorway architecture degree requirements ,
2. Small compared with the same specification of the machine style doors 2, footprint ,flexible installation in the door after the hole is turned on internally stacked above the hole , do not take up interior space , Large Span hole may be provided a plurality of movable rail the entire door into several independent stacking doors shorten the span of a single door so that the overall thickness of the door is reduced , further reducing the footprint
3. Rational layout flexible doors with movable rail rail can set different activities based on the specific circumstances of the door into the door several sizes of uneven accumulation of doors to make the building as a whole rational layout greatly reduces the overall architecture of the space and cost
4. The wind strength between two layers of high flexible door curtain as the bottom of an aluminum beam has a wind skeleton steel structure , By adjusting the beam thickness and spacing , which can resist wind pressure of any intensity , so the door can be flexible for use in any area
5. The tensile strength of the flexible door after door curtain is double polyester fabric , high tensile wire rope equipped with ultra-high hole suitable for large machinery such as aircraft hangars and repository
6. The curtain coated with vinyl coated with a waterproof sunscreen and smoldering performance , capable of sound absorption retardant insulation mildew proof and so on
7. Safe door , Cube with anti-lock break to ensure safety in case of accidental breakage of wire rope jammed in the door quickly experience anywhere rails , Multiple protection features mechanical and electrical installation to ensure t he safety of goods passing aircraft and other vehicles and personnel , the movable rail is also equipped with anti-fall device , you can ensure reliable parked at the top of the hole after the movable rail is raised without falling , The bottom of the door is equipped with and airbag , it will immediately rebound to rise until the safety door drops open when obstacles encountered in the process , You can also install infrared protection device on the door
PVC flexible gate,pvc high speed gate door, pvc high speed rolling gate door, flexible rolling doors,fast doors SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfarrs.com
 Overview
    Biaxial shredding machine, also known as shear crusher, through cut, tear, and squeezing the material size is reduced. The shredding machine is widely used in tires, waste plastics, waste rubber, waste wood, crop straw and other large volume.
Â
All equipment produced by our company can customize according to customer's requirements. Features · This series of biaxial shredding machine with double motors, double speed reducer design, ensure that the two main shaft of the machine cavity get equilibrium torque drivers. · Adopts hardfaced cylindrical gear reducer drive, power strong. · Blade using special special alloy tool steel forging and heat treatment several times, have very strong abrasion resistance and high strength, and have ability to repair use many times. · This series shredding machine have torn, extrusion, occlusion, and other functions. · Set to start, stop, reverse and overload automatic inversion of control function, effective protection and the main part of the machine tool. · With a low speed, high torque and low noise characteristics.
Important noteÂ
  1. The thickness of the shredding machine knife is divided into 15 mm, 20 mm, 40 mm, 50 mm and 75 mm, 100 mm, can choose according to object particle size after being broken blade.
  2. The shredding machine knives for single claw blade, if you need more than double claw blade and claw blade users can contact the sales department.
  3. The multifunctional shredding machine for grinding chunks of material, basket, tubes, plates, wood, tires, scrap metal barrel, big roll of film can be broken;Thick plate precision machining of composite frame structure, large Angle of six strong axis of rotation Angle, large diameter solid into the hopper, so you can rest assured put into large raw material.
Product pictures
The main technical parameters
Model
Knife thickness(mm)
Cutter diameter(mm)
Knife dish number
Capacity
(t/h)Power
(kw)Rotor Speed
(r/min)
ZT-2S600
40
300
15
1-2
18.5X2
30-40
ZT-2S1000
40
350
25
3-6
30X2
25-35
ZT-2S1200
40
400
30
5-8
37X2
20-30
ZT-2S1500
50
500
30
8-10
55X2
20-30
ZT-2S1900
50
550
38
10-15
75X2
20-30
This machine is suitable for crushing materials as follows   1.  All kinds of hollow container: plastic cans, plastic buckets, iron drum, packing boxes, packaging barrels.   2.  The waste electrical appliances: TV set, washing machine, refrigerator shell.   3.  The pipe: large pipes, pipe fittings, PE pipes.   4.  The old template: wooden pallets, plastic pallet, forklift plate.   5.  Old tires, car tires, truck tires.   6.  Scrap metal: car shell, aluminum alloy, scrap aluminum parts, motor shell, lead, and the steel plate thickness under 5 mm.   7.  Eat hutch waste, living garbage, dead animals, RDF derivatives, medical waste, straw, garden rubbish.   8.  Glue head, mill twisted rope.
What We Have Â
1> China Leading Producing Technology.
2> Super High Quality.
3> Competitive Price.
4> Big Production Ability.
5> Fast Delivery.
6> Excellent Sale and After-sale Service.
Why choose us
1> strong R&D department.
2> Exported to more than 1000 customers from more than 50 countries.
3> We promiss machine keep working over 10 years in good working condition.Fewer easy broken parts,easy to change.
4> Intelligent PLC control system,easy operate,more hommization.
5> One year guarantee time,24 hours online service.
6> OEM,ODM and customized service.
7> SGS ISO certificates.
8> We pay attention to the service customer quality,not customers quantity.
  Customers to buy our company products are sold, is only the beginning of the relationship with our company, is the beginning of the after-sales service work, in the whole stage of customers to use the machine, we all after-sales service staff with thoughtful, meticulous, enthusiastic, timely service, let customers at ease, worry-free use of equipment, can really experience the our products bring convenience and create value for customers.
  Thank you for your attention to our products, if you want to know more information, please feel free to contact us, we sincerely provide you with the most satisfactory service!
Factory pictures
Main products
 1. plastic shredder
 2. wood shredder
 3. tire shredder
 4. dead animal shredder
 5. household refuse shredder
 6. kitchen garbage shredder
 7. tyre shredder
 8. crusher shredder
 9. scrap shredder
10. Auto Tire Shredder
11. cold dead cow shredder
12. medical waste shredder
Contact us
PHONE:+86-536-337-5858
FAX:+86-536-333-0966
Web site:http://www.wfzthuanbao.com
Â
Â
Â
Used Tire Shredder/Municipal Solid Waste/Plastic/Metal/Wood/Radial Rubber Tire Crusher
 Overview
    Biaxial shredding machine, also known as shear crusher, through cut, tear, and squeezing the material size is reduced. The shredding machine is widely used in tires, waste plastics, waste rubber, waste wood, crop straw and other large volume.
Â
All equipment produced by our company can customize according to customer's requirements. Features · This series of biaxial shredding machine with double motors, double speed reducer design, ensure that the two main shaft of the machine cavity get equilibrium torque drivers. · Adopts hardfaced cylindrical gear reducer drive, power strong. · Blade using special special alloy tool steel forging and heat treatment several times, have very strong abrasion resistance and high strength, and have ability to repair use many times. · This series shredding machine have torn, extrusion, occlusion, and other functions. · Set to start, stop, reverse and overload automatic inversion of control function, effective protection and the main part of the machine tool. · With a low speed, high torque and low noise characteristics.
Important noteÂ
  1. The thickness of the shredding machine knife is divided into 15 mm, 20 mm, 40 mm, 50 mm and 75 mm, 100 mm, can choose according to object particle size after being broken blade.
  2. The shredding machine knives for single claw blade, if you need more than double claw blade and claw blade users can contact the sales department.
  3. The multifunctional shredding machine for grinding chunks of material, basket, tubes, plates, wood, tires, scrap metal barrel, big roll of film can be broken;Thick plate precision machining of composite frame structure, large Angle of six strong axis of rotation Angle, large diameter solid into the hopper, so you can rest assured put into large raw material.
Product pictures
The main technical parameters
Model
Knife thickness(mm)
Cutter diameter(mm)
Knife dish number
Capacity
(t/h)Power
(kw)Rotor Speed
(r/min)
ZT-2S600
40
300
15
1-2
18.5X2
30-40
ZT-2S1000
40
350
25
3-6
30X2
25-35
ZT-2S1200
40
400
30
5-8
37X2
20-30
ZT-2S1500
50
500
30
8-10
55X2
20-30
ZT-2S1900
50
550
38
10-15
75X2
20-30
This machine is suitable for crushing materials as follows   1.  All kinds of hollow container: plastic cans, plastic buckets, iron drum, packing boxes, packaging barrels.   2.  The waste electrical appliances: TV set, washing machine, refrigerator shell.   3.  The pipe: large pipes, pipe fittings, PE pipes.   4.  The old template: wooden pallets, plastic pallet, forklift plate.   5.  Old tires, car tires, truck tires.   6.  Scrap metal: car shell, aluminum alloy, scrap aluminum parts, motor shell, lead, and the steel plate thickness under 5 mm.   7.  Eat hutch waste, living garbage, dead animals, RDF derivatives, medical waste, straw, garden rubbish.   8.  Glue head, mill twisted rope.
What We Have Â
1> China Leading Producing Technology.
2> Super High Quality.
3> Competitive Price.
4> Big Production Ability.
5> Fast Delivery.
6> Excellent Sale and After-sale Service.
Why choose us
1> strong R&D department.
2> Exported to more than 1000 customers from more than 50 countries.
3> We promiss machine keep working over 10 years in good working condition.Fewer easy broken parts,easy to change.
4> Intelligent PLC control system,easy operate,more hommization.
5> One year guarantee time,24 hours online service.
6> OEM,ODM and customized service.
7> SGS ISO certificates.
8> We pay attention to the service customer quality,not customers quantity.
  Customers to buy our company products are sold, is only the beginning of the relationship with our company, is the beginning of the after-sales service work, in the whole stage of customers to use the machine, we all after-sales service staff with thoughtful, meticulous, enthusiastic, timely service, let customers at ease, worry-free use of equipment, can really experience the our products bring convenience and create value for customers.
  Thank you for your attention to our products, if you want to know more information, please feel free to contact us, we sincerely provide you with the most satisfactory service!
Factory pictures
Main products
 1. plastic shredder
 2. wood shredder
 3. tire shredder
 4. dead animal shredder
 5. household refuse shredder
 6. kitchen garbage shredder
 7. tyre shredder
 8. crusher shredder
 9. scrap shredder
10. Auto Tire Shredder
11. cold dead cow shredder
12. medical waste shredder
Contact us
PHONE:+86-536-337-5858
FAX:+86-536-333-0966
Web site:http://www.wfzthuanbao.com
Â
Â
Â
Used Tire Shredder/Municipal Solid Waste/Plastic/Metal/Wood/Radial Rubber Tire Crusher
Model NO.: ZT-2S1500
Cutter Material: High-Speed Steel
Finished Surface: Outer Surface Process
Compressive Strength (For Crushing): >300MPA
Tongs′ Features: Adjustable Tongs
Product Name: Used Tire Shredder/Radial Rubber Tire Crusher
Certificate: ISO9001 SGS
Application: Reduce The Material
Shaft Design: Double Shaft Shredder
Suitable Object: Plastic/ Household Garbage/Restaurant Garbage
Knife Thickness: 50mm
Cutter Diameter: 500mm
Knife Dish Number: 30
Power: 55X2kw
OEM: Accepted
Trademark: ZTHB
Transport Package: Wooden Cases
Specification: ZT-2S1500
Origin: Weifang-China
HS Code: 8477800000
Model NO.: ZT-2S1500
Cutter Material: High-Speed Steel
Finished Surface: Outer Surface Process
Compressive Strength (For Crushing): >300MPA
Tongs′ Features: Adjustable Tongs
Product Name: Used Tire Shredder/Radial Rubber Tire Crusher
Certificate: ISO9001 SGS
Application: Reduce The Material
Shaft Design: Double Shaft Shredder
Suitable Object: Plastic/ Household Garbage/Restaurant Garbage
Knife Thickness: 50mm
Cutter Diameter: 500mm
Knife Dish Number: 30
Power: 55X2kw
OEM: Accepted
Trademark: ZTHB
Transport Package: Wooden Cases
Specification: ZT-2S1500
Origin: Weifang-China
HS Code: 8477800000
Used Tire Shredder/Municipal Solid Waste/Plastic/Metal/Wood/Radial Rubber Tire CrusherWEIFANG ZHITE ENVIRONMENTAL PROTECTION TECHNOLOGY CO; LTD
MOB:+86-189-5366-0555
WEIFANG ZHITE ENVIRONMENTAL PROTECTION TECHNOLOGY CO; LTD
MOB:+86-189-5366-0555