Nantong Weizhuo Environmental Protection Equipment Co.,Ltd , https://www.cwznts.com
Trumpet Tube End is often used in the pipe connecting and welding of the condenser and evaporator.
As to the flaring shape,the size should be proper,too big size will cause crack, too small size leads to insufficient contact area,it should be uniform, smooth, no scratches, no burr.
Automatic Pipe End Flaring Machine is mainly used for machining the copper or aluminum pipe end into flaring shape by high speed spinning and pressing way,compared with the mechanical forging way,the tube end will be much more smooth, flat, no rupture.
Â
Main Technical Parameters
Copper & Al Pipe Diameter
3-35MM
Copper & Al Pipe Length
≥100MM
Driving Mode
Pneumatic or Electrical
Processing Mode
Cold-forging+Spinning
Producing and Processing Efficiency
1-5Seconds/PC
Input Voltage
220V / 380V / 440V / 480V, 50/60Hz
Machine Weight
350KG
Machine Photo
Factory Photo
Â
Main Characteristics and Applications
Trumpet Tube End is often used in the pipe connecting and welding of the condenser and evaporator.
As to the flaring shape,the size should be proper,too big size will cause crack, too small size leads to insufficient contact area,it should be uniform, smooth, no scratches, no burr.
Automatic Pipe End Flaring Machine is mainly used for machining the copper or aluminum pipe end into flaring shape by high speed spinning and pressing way,compared with the mechanical forging way,the tube end will be much more smooth, flat, no rupture.
Â
Main Technical Parameters
Copper & Al Pipe Diameter
3-35MM
Copper & Al Pipe Length
≥100MM
Driving Mode
Pneumatic or Electrical
Processing Mode
Cold-forging+Spinning
Producing and Processing Efficiency
1-5Seconds/PC
Input Voltage
220V / 380V / 440V / 480V, 50/60Hz
Machine Weight
350KG
Machine Photo
Factory Photo
Â
Tube or Pipe Trumpet End Forming Machine
Model NO.: ST-EFM Series
HS Code: 8455229090
Model NO.: ST-EFM Series
HS Code: 8455229090
Main Characteristics and Applications