Low temperature in winter, it is best to put the electric car in the house

According to Battery.com.cn, since the winter temperature has dropped, the electric car of Mr. Min Wang of Feicheng City has become more and more unattended. "Before running for a day, there is still a large amount of electricity. Now it is good, I can’t run for a day. The electricity is finished, which makes me often come back. "The car was sent to the store for testing, but it showed that everything was normal, which made him wonder: "Is the electric car afraid of cold?"

Subsequently, the reporter interviewed several people riding electric vehicles on the streets of Feicheng City. Everyone said that the batteries of electric vehicles are obviously not as durable as summer in the winter. Ms. Zhao said that when the weather was warm, her electric car was charged once or twice a day, and it has now become once a day.

Does the electric car not ride, is it really related to the cold weather? "If the temperature is lower than 0 °C, the battery's power will drop by nearly 50%." A staff member of a brand electric car store said, "Now electric car Most of the batteries use lead-acid batteries , and the cruising range has a lot to do with the outdoor temperature. It is normal for the battery to drop in the winter."

"It is best to put the car in the house, the heater can be placed indoors, and should be lubricated." The above staff said that under the premise of ensuring safety, residents should minimize braking and starting to save energy. In the case of heavy loads such as uphill and top wind, use the pedal to assist. Before going out, check whether the electric bicycle accessories are good. If there is water in the rain or snow, you can't let the water flood the center of the hub, so as to extend the life of the battery and the motor.

Advertising Film

As an amorphous resin, it has a good dimensional accuracy when forming and is not significantly changed by external deformation. Therefore, it performs well in dimensional accuracy and stability and is suitable for precision forming.