Reactor Introduction:
Generally speaking, the hydrogenation reaction kettle can be divided into two categories: One is the traditional stirred reactor. Gas in the upper space of the vessel can not be circulated in the liquid phase, because of the miscibility and density difference of the gas and liquid. The unreacted gas accumulates in the upper space of the reactor in the reactor, which seriously affects the reaction rate.The other is the reaction kettle in which the gas is circulated in the liquid phase. Gas-liquid reaction is a kind of reaction often encountered in petrochemical, fine chemical, biological chemical and pharmaceutical chemical industries. Typical applications include catalytic hydrogenation, catalytic oxidation and fermentation. The common characteristic is that the contact area between gas and liquid significantly affects the reaction rate.
This equipment consists of a set of special components to achieve transmission requirements and shear deformation, high gas internal circulation and turbulence.When motor rotates by driving internal hollow agitator the centrifugal force produced by the circular motion of the fluid nearby under the action of the impeller makes the agitator self-priming, when negative pressure zone is formed, inner part will connected to gas through air axis,Thus, the gas on liquid surface is continuously sucked into the agitator and redispersed in liquid phase,It is especially suitable for gas-liquid and gas-liquid-solid heterogeneous reactions, such as liquid-phase catalytic hydrogenation, oxidation, amination, alkylation, fluorination, etc.
Hydrogenation Reaction Kettle,5000L Hydrogenation Reactor,Energy Saving Hydrogenator Reactor,Hydrogenator Stainless Steel Reactor Yangzhou Tongyang Chemical Equipment Co., Ltd. , https://www.tongyangchemic.com
Â
Product Description
(1).Material:aluminum
(2).Surface Finished: anodized
(3).Process: CNC milled parts
(4).Tolerance:0.02mm
Parts Information:
(1). Applicable Material---Aluminum/zinc alloy, iron, steel alloy, plastic, brass, steel, and stainless steel
(2). Surface treatment---polishing, zinc plating, nickel plating, chrome plating, anodizing.
(3). Payment Terms: 40% deposit before production and 60% balance before arrange shipping                                                          Â
(4). Packaging: Standard package/ Pallet or container/ as per customized specifications.
(5). Shipment Terms: Express & air freight is preferred / sea freight/ as per customized specifications.
Our Bussiness:Â
1.Aluminum Precision Product
2.Extrusion/ Profile
3.Hardware
4.Injection molding
5.Aluminum Frame
6.Furniture Part
7.Aluminum Office and Living Product
8.CNC Precision Milling Part
9.CNC Precision Turning Part
10.Punch& Stamping& Stretching& Riveting& Assembly
11.Die Casting& Welding& Forging& Bending Part
12.Medical Aluminum Part
13.Aluminum Pipe
14.Large Cross-section/ High Challenge Heat Sink
15.Mechanical Industrial product/ Auto Part
16.LED Aluminum Accessory
17.Mold Design and Manufacture
18.Surface treatment
Company Information
LCH was found in 2004,with a total investment of $1.5 million,over 4,500 square meters,equiped with the most advanced high precision CNC Milling machine(30sets), CNC  turning machine(32sets),CNC machining center,automatic lathe and various kinds of secondary processing equipment more than 80 sets.
How we can keep the high quality parts always?
1.All our material will be tested by SGS before production
2. Full control of process:
(1).During the part production,our QC worker will inspect the part size every one hour,this will help us to keep the correct tolerance during production
(2). When the parts machining finished,they will be arranged to have surface finished(such as anodize or powder coated),after that,our QC worker will inspect the parts again,because after surface finished,part tolerance may be difference sometimes,if there is any defective parts we found,we will pick them out directly
(3). Before shipping,our package worker will check the part surface and see if there is any scrach or any other thing that affect the part looking,if yes,pick them out
What can we do for you?
1.Professional, Competitive price and Fast delivery time
We engaged in this area for almost 11yeas,experience engineer can help you process the project well and perfect,also we own our factory,that we can control the cost and delivery time very well.We can try best to meet your reuest.
2. Protect our customer profit well
Even we have very strictly quality control stystem,but we still can`t promise every part you recieved will 100% perfect,so if there is any defective part you recieved,you just need to offer us the evidence(such as picture),we will check and confirm it.After that,we will repair or redo them.
Because of our strictly quality control system,so we have the confidence to promise our customer with this.Please kindly noted that it`s our advantage compare with others,we realize that only the high quality and good service can keep the friendly and long-term bussiness relationship with our customer and it`s also the only way our company can stronger and stronger.
Thanks for your kind attention, looking forward to your inquiry and we ensure tip top quality products with the best lead-time being provided!
Â
                    5 Axis cnc automatic lathes and milling machining brass worm gear
Â
Product Description
(1).Material:aluminum
(2).Surface Finished: anodized
(3).Process: CNC milled parts
(4).Tolerance:0.02mm
Parts Information:
(1). Applicable Material---Aluminum/zinc alloy, iron, steel alloy, plastic, brass, steel, and stainless steel
(2). Surface treatment---polishing, zinc plating, nickel plating, chrome plating, anodizing.
(3). Payment Terms: 40% deposit before production and 60% balance before arrange shipping                                                          Â
(4). Packaging: Standard package/ Pallet or container/ as per customized specifications.
(5). Shipment Terms: Express & air freight is preferred / sea freight/ as per customized specifications.
Our Bussiness:Â
1.Aluminum Precision Product
2.Extrusion/ Profile
3.Hardware
4.Injection molding
5.Aluminum Frame
6.Furniture Part
7.Aluminum Office and Living Product
8.CNC Precision Milling Part
9.CNC Precision Turning Part
10.Punch& Stamping& Stretching& Riveting& Assembly
11.Die Casting& Welding& Forging& Bending Part
12.Medical Aluminum Part
13.Aluminum Pipe
14.Large Cross-section/ High Challenge Heat Sink
15.Mechanical Industrial product/ Auto Part
16.LED Aluminum Accessory
17.Mold Design and Manufacture
18.Surface treatment
Company Information
LCH was found in 2004,with a total investment of $1.5 million,over 4,500 square meters,equiped with the most advanced high precision CNC Milling machine(30sets), CNC  turning machine(32sets),CNC machining center,automatic lathe and various kinds of secondary processing equipment more than 80 sets.
How we can keep the high quality parts always?
1.All our material will be tested by SGS before production
2. Full control of process:
(1).During the part production,our QC worker will inspect the part size every one hour,this will help us to keep the correct tolerance during production
(2). When the parts machining finished,they will be arranged to have surface finished(such as anodize or powder coated),after that,our QC worker will inspect the parts again,because after surface finished,part tolerance may be difference sometimes,if there is any defective parts we found,we will pick them out directly
(3). Before shipping,our package worker will check the part surface and see if there is any scrach or any other thing that affect the part looking,if yes,pick them out
What can we do for you?
1.Professional, Competitive price and Fast delivery time
We engaged in this area for almost 11yeas,experience engineer can help you process the project well and perfect,also we own our factory,that we can control the cost and delivery time very well.We can try best to meet your reuest.
2. Protect our customer profit well
Even we have very strictly quality control stystem,but we still can`t promise every part you recieved will 100% perfect,so if there is any defective part you recieved,you just need to offer us the evidence(such as picture),we will check and confirm it.After that,we will repair or redo them.
Because of our strictly quality control system,so we have the confidence to promise our customer with this.Please kindly noted that it`s our advantage compare with others,we realize that only the high quality and good service can keep the friendly and long-term bussiness relationship with our customer and it`s also the only way our company can stronger and stronger.
Thanks for your kind attention, looking forward to your inquiry and we ensure tip top quality products with the best lead-time being provided!
Â
1. Types: tubular reactor, tank reactor, solid particle bed reactor, tower reactor, jet reactor and other atypical reactor.
2. Concrete products: reactor, reaction kettle, autoclave, high-pressure kettle, high-pressure autoclave, super autoclave, synthetic tower, decomposition pan, vulcanizer, decomposition tower, polymerization kettle, transform furnace, cooking pot, steamed ball, gas furnace.
3. Materials: carbon steel, low-alloy steel, stainless steel and non-ferrous metals: titanium, nickel, copper, aluminum, molybdenum, zinc, cobalt etc and their alloy materials.
4. Pressure: low-pressure, medium-pressure and high-pressure.
5. Temperature: low-temperature, medium-temperature high-temperature.
6. Medium: not only non-flammable, non-toxic and non-corrosive medium but also flammable,toxic,corrosive medium and highly flammable,highly toxic, highly corrosive medium.
7. Processing capacity: maximum diameter:6m; maximum length:60m;maximum weight:600tons
8. Applicable Industries: petrochemical, coal chemical, precision chemical, nuclear power, metallurgical, pharmaceutical, machinery, food, pesticide, rubber, aerospace, marine, dye, new power equipment and so on.
9. Our advantages: reliable quality,codial service and great price.
5 Axis CNC Automatic Lathes and Milling Machining Brass Worm Gear
Model NO.: S181
Finish: Polished,Powder Coating,etc
Tolerance: +/- 0.02mm
Scrap Rate: 1%~2%
MOQ: 100PCS
Leading Time: 10~15days
Trademark: LCH
Transport Package: EPE
Specification: SGS
Origin: Shenzhen, Guangdong
HS Code: 7616100000
Model NO.: S181
Finish: Polished,Powder Coating,etc
Tolerance: +/- 0.02mm
Scrap Rate: 1%~2%
MOQ: 100PCS
Leading Time: 10~15days
Trademark: LCH
Transport Package: EPE
Specification: SGS
Origin: Shenzhen, Guangdong
HS Code: 7616100000
                    5 Axis cnc automatic lathes and milling machining brass worm gear