PET Strapping Band Machine is main used to make pet strap ,pet packing strap .
Adopt the plc control the whole line do the auotmatic production
it use the melting pump and pressure sensor ensure the production stable and strap quality control
The raw material you can use is 100% recycled pet flakes from the waste pet bottles,or virgin material or mixed with each other.
Advantage:
1.Use 100% Recycled PET Flakes to reduce the cost
2.Good dehumidifer drying system(Crystallization system optional ) to ensure the material equal dryer to produce high quality strapping Pet Strapping Band Machine,pet strapping band production line,pet strapping band extrusion line,pet strap machine zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstarmachienry.com
Brief introduction:
The roll forming machines can produce various of steel roof and wall panel, it is a new building materials, the products are widely used as the roof and wall of factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, etc. It has many advantages, such as easy installation, short building period, beauty, light weight but high strength.
The chart of Process Flow and components
Manual uncoiler- Roll forming machine- Computer control system- Hydraulic control system- Form cutter
No.
main parameter of Double-Deck Forming Machine
1
Suitable to process
Color steel plate, Galvanized Board, Aluminum Plate
2
Width of the plate
1000mm
3
Rollers
15rows,
4
Dimensions
7.2*1.4*1.5m
5
Motor Power
Oil pump power4+4kw
6
Thickness of the plate
0.3-0.6mm
7
Productivity
20-25m/min
8
Material of the cutting blade
Cr12
9
Diameter of the roller
Φ70mm
10
Weight
About 5.8 T
11
Voltage
380V 50Hz 3phases
12
Main frame
300mmH steel
14
Control system
PLC Frequency ControlSystem with touch screen
Advantages of the roofing sheet roll forming machine
1. High efficiency
2. Lower cost
3. Long life time: 30years
4. Low energy consumption
5. PLC control, Panasonic or Siemens or eura
6. Easy operation
7. Beautiful and best quality
Parameters of the Machine:
1. Suitable material: Color steel plate, Galvanized Board, Aluminum Plate, etc.
2. Suitable thickness: 0.3-0.8mm or other thickness
3. Forming specifications: Depending on specific requirements of customers
4. Forming speed: 15-20m/min
5. Main motor power: 4Kw (depending on specific requirements of users)
6. Cutting mode: Hydraulic cutting
7. Hydraulic station power: 4Kw (depending on specific requirements of users)
8. Control system: PLC systems from Mitsubishi, Schneider and Panasonic products, electrical appliances of famous brands
9. Way of drive: One inch chain
10. Optional accessories: Hydraulic uncoiler.
11. Material of roller: High grade 45# forged steel plated with hard chrome plating
Cangzhou Xindingli Cold Bending Machinery Co., Ltd
Contact person: Angela  Lee
Contact me to get more information
Welcome to contact and visit us, waiting for your cooperation sincerely.