For those who have worked in airport before the special vehicles Xiaobian introduced, today Xiao Bian will elaborate on the aircraft refueling vehicles. The aircraft refueling truck is specially used for refuelling or pumping the airport aircraft. It is more complex than the ordinary refuelling vehicle design and the production process is more stringent. Because the aircraft is used aviation kerosene, and this oil has a certain degree of corrosivity to the metal, so there must be anti-corrosion function where kerosene has passed. What are the characteristics of this highly demanding vehicle? 1. The top and chassis of an aircraft refueling vehicle can be completely independent to facilitate maintenance. Aircraft refuelling vehicles can be equipped with work lights, sampling lights, etc. The small accessories such as electrostatic reel and wheel stop can be installed according to the user's requirements, and they are equipped with special aviation fueling ladders for users. Second, aviation kerosene is involved, so low speed (usually less than 45km/h). Explosion-proof fire protection, anti-leakage, and operational safety are the basic operating conditions for aircraft refuelling vehicles. Third, as the vehicle driving on the site, not subject to the relevant regulations on road vehicles. Convection fuel consumption, acceleration performance, coasting performance, etc. are not required to meet the requirements of standard limits, mainly to meet airport airport equipment standards and airport customers' special requirements. Fourth, the current aircraft refueling vehicle function is more and more powerful, in order to prevent people from leaving in the refueling process, specifically designed to be constantly activated form, if people leave the refueling will stop. An audible and visual alarm system is also installed on aircraft refuelling vehicles. In emergency situations, the alarm system will alert the staff. Due to the special production process, the anti-explosion performance of the aircraft refueling vehicle is very good. Editor's Note: In the production of aircraft refueling vehicles, due to its material, structure, design have special requirements, so the cost is also more expensive than ordinary refueling vehicles. However, everyone does not think it too mysterious. Aircraft refuellers are also based on refuelling vehicles. Airport Vehicle Link: http:// Iron-based laser cladding powders are used in the laser cladding process, which is a technique used to apply a protective coating or build up a desired shape on a metal surface. These powders consist of iron as the main component, along with other alloying elements to enhance specific properties. SS Powder,316L Powder,Steel Powder,Stainless Steel Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.lygoldentool.com
Iron-based laser cladding powders typically have a controlled particle size distribution and composition to ensure optimal performance during the laser cladding process. They are designed to have good flowability and excellent metallurgical bonding with the substrate material.
The laser cladding process involves melting the iron-based powder using a high-energy laser beam, which is directed onto the metal surface. The molten powder then solidifies and forms a metallurgically bonded layer with the substrate. This layer can provide improved wear resistance, corrosion resistance, or other desired properties to the metal surface.
Iron-based laser cladding powders are commonly used in industries such as aerospace, automotive, oil and gas, and manufacturing, where there is a need for high-performance coatings or repair of damaged components. They offer advantages such as precise control over the coating thickness, minimal heat input, and reduced dilution with the substrate material.
Overall, iron-based laser cladding powders play a crucial role in the laser cladding process, enabling the creation of high-quality coatings and repair of metal components with improved performance and longevity.