Flame heater is a kind of equipment that uses the heat energy generated by the combustion of flame to heat. It usually consists of a fuel supply system, an ignition system, a combustion chamber, a Heat Exchanger and an emission system. The fuel supply system usually uses liquefied gas, natural gas or diesel as the fuel, the ignition system is used to ignite the fuel, the combustion chamber is where the fuel is burned, the heat exchanger is used to transfer the heat generated by the combustion to the heated object, and the emission system is used to discharge the exhaust gas produced by the combustion. Flame heater is widely used in industrial production, construction sites, wild camping and other occasions, has the advantages of fast heating, high efficiency, easy operation and so on.
The main business scope is various heaters, waste heat boilers, pressure vessels, supportingair preheaters, air coolers, furnace accessories and accessories, and provide equipment installation, with EPC ability of projects. At present, our customers have covered all large and medium-sized petrochemical enterprises in China and established long-term strategic cooperative partnership with them. Products are exported to Southeast Asia, Middle East, and other regions.
Fired Heater,Hydrogenation Project,Hydrogen Production Eguipment,Heating Furnace Equipment Jiangsu Gelan Environmental Technology Co., LTD , https://www.etfiredheater.com
Feature:
1. Model: DT-1325-1-1
2. Internationally advanced NC studio system which have memory
Of f breakpoint can guarantee resumption of processing in case of
Incident (breaking) or of work of the previous day.
3. Imported linear square rails, double big slider, loading capacity,
Smooth operation, high precision, long life, accurate operation.
4. Constant power spindle motor, strong and accurate cutting, high efficiency
Application:
Granite, marble, bluestone, sandstone, glass and stone carving.
If you have specific requirement for stone carving machine cnc router, customization is available.
NO
Performance index
Performance index
Parameter
Optional
1
 Working area
 X area
1300mm
2000
 Y area
2500mm
5000
 Z area
300mm
500
2
 Table size
1300mm*2500mm
 2200mm*3000mm
3
 Accuracy
 Working precision
0.05mm
 Repositioning precision
0.05mm
4
 Drive mode
 X axisÂ
Rack gear
 Y axisÂ
Rack gear(dual-moter)
 Z axisÂ
Screw
5
 Speed
 Max traverse speed
30000mm/min
 Max engraving speed
8000mm/min
6
 Spindle (water-cooling)
 Spindle power
3KW
1.5KW_5.5KW
 Spindle speed
0_24000r/min
7
 Working mode
Stepper
8
 Operating voltage
AC220V/50HZ
9
 Command code
GÂ code
10
 Operating system
NC Studio 53C
11
 Net weight
2520KG
Parts of machine can be customized as your requirement:
1. Motor (stepper or servo motor)
2. Spindle ( air-cooling or water-cooling spindle)
3. Guide rail (round guide rail or square guide rail)
4. The table of  machine (Vacuum table, T-slot table,  table moving)
5. Other partsÂ
OEM Service Available
1. Usually, we will manufacturer the machine as our regular design.Â
2. X YÂ Z Working Area could be customer-oriented designing.Â
3. Special configuration could be customer-oriented designing.Â
Technical support:
1. Technical support by phone, email or MSN/ Skype around the clock
2. Friendly English version manual.
3. Engineer available to service machinery overseas. but the buyer should pay the fee.
After-sale & guarantee service:
1. Under normal usage, 1 year for the whole machine and 6 months for spindle
2. Normal machine is properly adjusted before dispatch.
3. You will be able to get free training advice towards our machine in our factory.
4. You will also get free suggestion and consulting, technical support and service by email/fax/ tel and lifetime
  technical support
Configuration as you require:
1. System: NC studio, SYNTEC , Richauto......
2. Motor: Yaskawa, Pansonic, Estun, Delta.....
3. Guild rail: PMI, Hiwin ......
4. Spindle: HSD, HQD......
If you have specific requirement for heavy duty sone cnc router machine, customization is available.
Granite, Marble, Bluestone, Sandstone, Heavy Duty Stone CNC Router Machine
Model NO.: 1325
Certification: CE, SGS
Current: AC
Application: Decoration, Stone Industry
Customized: Customized
Control System: Nc Studio
Guild Rail: Hiwin / PMI Square Rail
Ball Screw: PMI Taiwan
Drive Mode: Stepper
Trademark: dongtong
Specification: CE
Origin: Shandong China
HS Code: 84609090
1325 Granite, Marble, Bluestone, Sandstone, Glass and Stone Carving Machine Heavy Stone CNC Router from  professional stone cnc router manufacturer.