Car Jack,Portable Car Jack,Car Jack And Stands,Auto Jack Stands WUQIANG HONGMA TOOLS MANUFACTURE CO., LTD , https://www.hmrapairtools.com
1, the performance index type: standard single-channel transmitter, precision cast aluminum shell;
Power: +24V DC power supply, maximum power consumption 1W;
Signal input: Connect 8mm eddy current sensor probe;
(Transmitter input signal is selected, it cannot be changed)
Output accuracy: ±0.5%;
Proportional to the full-scale measurement value is 4 ~ 20mA (with load capacity ≥ 500Ω);
Measurement accuracy: ±0.02;
Buffered output BUF: 4~20V linear voltage output
Measurement frequency range: 0 ~ 10Hz.
Quality: 0.3Kg;
Operating environment: 0 ~ 80 °C;
Relative humidity: no more than 95%, no condensation.
2, the panel description:
OK indicator: green,
Light on: The transmitter and measurement link are working properly.
Lamp off: Indicates that the transmitter and measurement link are not working properly; Possible causes: 1) No transmitter signal is connected.
 2) Transmitter input signal is not within OK range.
3) The power supply is abnormal;
Adjust potentiometer: Used for current output calibration.
 Zero: zero adjustment potentiometer;
 Ampl.: Full adjustment potentiometer;
NE3911 shaft displacement transmitter
NE3911 Axis Displacement Transmitter is a kind of analog transducer with high conversion accuracy, built-in eddy current driver, and matched with various types of eddy current sensor probes (or extension cables) to convert the measured displacement signal. The 4 to 20mA current output of the corresponding range facilitates remote display and control, and is suitable for connection to DCS, PLC, and data acquisition systems.