Municipal application paper Wirtgen's new generation of two-meter milling machine nationwide tour

As a result, Wittgen has 3 models in the milling machine range of 2 meters, which greatly enriches the customer's selectivity and better meets the customer's application requirements in different construction fields!

Wirtgen's new generation of two-meter milling machine nationwide tour

Since September 2017, Wirtgen China has been carrying out nationwide tours of the new 2-meter filer W 195 and W 205 across the country. It has performed in various sites in Anhui, Jiangsu, Zhejiang, Shanghai, Shandong and Guizhou. ! Received enthusiastic response and achieved customer acclaim!
Anhui Hefei Station:

Wirtgen’s national tour to Hefei came to Hefei, adding fuel to the municipal road project in Hefei, Anhui Province!

The protagonist of the construction of the municipal road is Changjiang Road, which is a municipal road in Hefei, Anhui Province. It was built during the Qing Jiaqing period and is called the First Road of Anhui Province.

Wirtgen China National Tour to Hefei Station

For Hefei citizens, Changjiang Road bears the memory of many people. All the way to the road is like a box of old film. In order to meet the growing needs of the city's roads, Lushan District, Hefei City, will do a great job for 180 days. With the spirit of “embroidery needles,” it will “embrace the needle” and embroider a modern urban landscape with historical heritage.

Hefei station site

Changjiang Road starts from Heliu Road in the west and Longquan Road in the east, with a total length of 32.2 kilometers. The road is set up as a standard two-way eight-lane road and a two-way 10 lane at the BRT platform. In this renovation project, half of the construction will be completed and the construction period will be 180 days. The unclosed side will have two-way traffic. It is expected that the main lane will be open to traffic in early January of 2018 and the overall renovation will be completed by May 16, 2018.

Yangtze River Road Construction

We are pleased to see that the relevant department has adopted a completely enclosed construction scheme so that the milling capacity of Wirtgen W 195 can be fully utilized. When milling 4.5 cm of asphalt wear layer, the speed of the machine can be as high as 46.5 m/ minute!

Construction Site

This creates a record of municipal construction milling speeds, thanks to the machine's good operational vision and new and extremely convenient handling concepts, making this possible!

Jiangsu Suzhou Station:

The Wirtgen China National Tour arrived at the Suzhou Station. Wirtgen W 195 conducted a 11-day multi-site tour to add fuel to the municipal road project in Suzhou, Jiangsu Province!

Suzhou Station

In the early part of the tour, Wirtgen W 195 carried out construction work at the intersection of Nanfeng Road Meifeng Road in Kunshan. It was a construction project for a municipal conservation company in Kunshan. The engineered milling area is 4,800 square meters. The first milling process is a 30-cm water-stabilizing layer with a milling speed of 8-9 meters per minute.

In the later part of the tour, milling was performed at Wirtgen W 195 in southern Suzhou. The primary milling of 30 cm of bitumen was water stable. Due to the high hardness of the road surface, the milling progress was maintained at about 6 meters per minute.

The client reported that Wirtgen W 195 is powerful and has a much better level of use than imagined. Compared with their own W 2000, Wirtgen W 195 is clearly higher than one level, operating efficiency is no less than W 2000, and it is operationally All aspects have been greatly improved, and the driver is comfortable and convenient to operate.

Jiangsu Suzhou Station Construction Site

The customer stated that the Wirtgen W 195 equipment was much better than its existing equipment in terms of operation and performance. After using it, without any hesitation, it immediately decided to buy a Wirtgen W 195 and Sign the order contract before the Spring Festival and pick up the goods after the Lunar New Year. Wirtgen W 195 has won the trust and praise of customers with outstanding performance and strong strength.

Yancheng Station, Jiangsu:

Wirtgen’s national tour to Yancheng Station took place. Wirtgen W 205 conducted a 11-day multi-site tour to fuel the municipal road project in Yancheng, Jiangsu Province!

Wirtgen China's National Tour Comes to Yancheng Station

In the early part of the tour, Wirtgen W 205 carried out the operation of milling and stabilizing the lime soil in Sunjia House in the new district of Yandu District. The milling depth was 28.5 cm and the milling speed was 13 meters per minute.

At the later stage of the tour, the young road milling asphalt layer is the main operation target of W 205. This type of project is a typical excavation work. Although the area is not very large, the amount of work at the intersection is large, the milling depth is 8 cm, and the speed is Milling 11.7 meters per minute.

The swing angle of the conveyor belt of the new Wirtgen two-meter milling machine has been greatly increased. The swing angle is as high as 120 degrees. This advantage makes the milling work at the intersection extremely easy, improving the construction efficiency for the customer!

Wirtgen China National Tour Yancheng Station

The client operator stated that he had previously operated W 1900 and was not very familiar with the Wirtgen W 205. It was not very adaptable when it was first started, but less than one morning he could operate alone. The new model is easy to operate.

Wirtgen China National Tour Yancheng Station

At the same time, he found that the W 205 has excellent performance in all aspects. The new operation concept helped him to easily use the device for the first time. In addition, the strong milling ability is the most desirable feature of this device.

Wirtgen W 205 Milling Machine

The customer was also very satisfied with the milling capabilities of the Wirtgen W 205 milling machine and the configuration of the machine. The performance of the equipment achieved his desired results. He finally chose to purchase the W 205 machine. Wirtgen W 205 has won the trust and praise of customers with outstanding performance and strong strength.

Municipal application summary:

Combined with some of the typical municipal site information above, we can clearly feel the excellent design of the new milling machine and the improvement of construction efficiency. Let us summarize some features of the municipal construction:

Most of the construction time of municipal projects is concentrated in the night. There are many types of underground manhole covers on both sides of the construction site and the traffic conditions are complex. The flexibility of the machine control, the operator’s view of control, and night lighting are all put forward. High demand.

Wirtgen a new generation of two meters milling machine

Wirtgen a new generation of two meters milling machine

So when it comes to such conditions, it's time for Wirtgen's new generation of two-meter mills!

Wirtgen W 195 adopts a bee-waist design to ensure an excellent operator's vision. During the construction work, the operator can easily observe the position of the machine's walking track and cutting edge of the milling drum. The multi-functional control handle can not only control The direction of the machine, speed, steering and the height of the legs of the machine, the sides of the drum, the position of the rear squeegee and the small conveyor belt.

Wirtgen a new generation of two meters milling machine

The working mode and leveling system can also be intelligently adjusted according to the actual working conditions. The new operating concept of one-hand operation plus the application of artificial intelligence control can easily deal with various complex construction processes (such as crossing over the milling work surface). Manhole covers, etc.) reduce the working intensity of the hand, while improving the working speed and milling quality, and ultimately improve the construction efficiency of the entire construction project, creating higher economic and social benefits!

The new LEVEL PRO PLUS leveling system on this equipment also uses the new concept of one-handed operation. The color display displays the height of the milling drum on both sides of the machine in real time, while displaying the third alternative in the center of the screen. Leveling sensor information and supporting preset leveling parameters greatly improve the efficiency of machine construction. The new generation leveling system is compatible with all Wirtgen leveling sensors and supports hot-plugging functions. It is more convenient, reliable, efficient, and intelligent! From this milling work is more simple!

Control platform

As a market leader, the Wirtgen brand provides customers with the most complete cold milling machine products in the entire industry. The addition of the flagship model W 215 and new products W 195 and W 205 enriches the entire product line and fully embodies Witt. Root milling products have established new industry leadership in the industry's new benchmarking and drive milling technology.