In July, as a traditional off-season sales season, during this period, the sales growth of many automakers will obviously slow down. However, in July this year, the Japanese car camp was another situation. According to the July sales figures released by the Japanese top three and its related Chinese brands in recent days, in the past July, the sales of the three Japanese car brands in China have achieved double-digit growth, including 113,803 Honda vehicles. It won the "Japan First"; Toyota second, sales of 108,900 in July; Nissan ranked third, in July accumulated sales of 104,794 vehicles in China. However, from the cumulative sales in China this year, Nissan surpassed Toyota in second place, except that Honda continued to maintain its number one position. The following are the sales performances of the Japanese top three in China: Honda: 113,803 vehicles sold in China in July In July, the Honda brand and the joint venture company’s own brand sold 113,803 vehicles in China in July, an increase of 11.6% year-on-year, setting a record for terminal sales for the month of July. Among them, Guangzhou Automobile Honda's terminal sales in July was 53,954 units, an increase of 5.1%; Dongfeng Honda's terminal sales in July was 59,849 units, an increase of 18.2%. From January to July, Honda brand and joint-venture company's own brands sold 757,970 vehicles in China, which was an increase of 17.6% over the same period of last year. Among them, Guangzhou Automobile Honda sold 384,778 units of vehicles from January to July, an increase of 11.0% year-on-year; Dongfeng Honda accumulated 373,192 units from January to July, a year-on-year increase of 25.3%. If we add 1,074 units sold by Acura brand in July and 7,573 units sold in July, the sales volume of Honda vehicles in China was 114,877 units in July, a year-on-year increase of 12.3%. From January to July, Honda was in China. Cumulative sales of 765,543 vehicles, a year-on-year increase of 18.5%. In terms of specific models, in July, there were four models sold by Honda in China each month with over ten thousand models, namely, 10,805 units of Guangzhou Honda Accord, 11,593 units of Guangqi Honda, 16,299 units of Dongfeng Honda Civic and 18,320 units of Dongfeng Honda XR-V. Among them, Accord is one of the best-selling models of Japanese mid-size cars. Although July sales still remained at more than 10,000 units, the Accord’s monthly sales decline since March is very worrying about its traditional sales in August. In the off-season, it is still possible to maintain the title of “ten thousand householdsâ€. The small SUV Binzhi continued to maintain its strong competitiveness in July, selling 11,593 vehicles, a slight increase of 9.2% from the previous quarter. After a short period of decline in the previous April and May, the Civic returned to 16,000 units in June, and continued to grow in July, selling 16,299 cars, a 91.8% year-on-year increase. The same is true for the XR-V, which has increased monthly sales since March and is now close to 20,000 units. While the other two main models - Fit and CR-V, the former sales in July was only 8,852 units, down 12.1% month-on-month, down 13.2% year-on-year; the latter sold in July after sales fell below 10,000 units in June Continued to shrink, only sold 3,987 vehicles, the chain fell sharply 45.1%, down 50.5%. Analysis of the reasons, CR-V due to the just-replaced, is still falling sales period, after all aspects of work tends to stabilize, is expected to re-ascend the altar. In terms of other models, Kuanben’s Lingpai and Guandao perform well, especially Guandao, and sales have continued to rise steadily since March, reaching 7,229 units in July. After the East Ben camp, Jade experienced a series of climbs for several consecutive months. In July, sales reached 4,680 units, a year-on-year increase of 53.3%. The UR-V, as the new flagship SUV model launched by Dongfeng Honda in March, has steadily increased its sales since its launch in March. It has reached 4,375 units in July. Under Yingge brand, CDX is the main growth point. In July, the sales volume reached 1,002 units. In the previous July, 6949 units were sold. This classification mainly includes the aluminum alloy die casting transmission parts using in Auto area,the raw material is aluminum alloy. Aluminum Transmission Parts,Die Casting Transmission Parts,Auto Transmission Parts,Malaysia Casting Transmission Parts NINGBO ZHENHAI BOLANG METAL PRODUCTS FACTORY , https://www.casting-part.com
In the die casting process,higher specific pressure is required, so that higher filling speed can be obtained.which is beneficial for alloy to overcome mold filling resistance.and effectively fill each part of the cavity.The Casting General Tolerance is Grade GB-CT4.
Process Technology: High pressure die casting, Cold Chamber
Product Dimensions: Customized
Casting General Tolerance: Grade GB-CT4
Flow Processes: Die casting, Degating to remove the residual of the gate, Polishing and Deburring to remove the burrs, Polishing to remove the parting line, flash,CNC Turning, Cleaning, Packaging, Storaging, Shipping
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection, and Outgoing quality control
Inspection Equipment: CMM, Caliper, Plug Gage, Screw Gauge
Application: Auto Parts
Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Lead Time: 30-35 days
Trade Term: FOB Ningbo