Hospital Medical airtight Sliding Door The medical automatic door is a door that is generally installed in the operating room or the ICU ward for the medical staff to push in and out of the hospital bed. The medical automatic door has the function of inductive opening and safety anti-pinch. The medical staff only needs to extend the foot into the light control foot sensing box next to the entrance, and the door will automatically close.
After a period of time, the door will automatically close after the cart and medical staff have fully entered. If someone or a cart is next to the door leaf, the door will not close to provide a safe anti-pinch. In addition, the door frame of the medical automatic door is made of sealed profile, which has the characteristics of high air tightness; the light control foot sensing is adopted for the entrance and exit, so that the medical staff can open the door [without contact", which can effectively isolate the bacteria and personnel.
If you are interested in our products, please kindly contact us hospital door,medical sliding door,automatic medical airtight doors,hospital automatic sliding airtight door,hermetic airtight shielding door SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfahsrd.com
Mingwei HLG family will be introduced into the global certification line
Since the introduction of the ELG family products into the global line, the parties have responded well. The customers also strongly urged the HLG family to be introduced into the global certification line, which is more conducive to expanding market applications and assisting customers in marketing their products worldwide. Ming Wei has also completed the The listed LED power driver HLG family product line has been fully upgraded to the evaluation and preparation of the global certification line. The relevant changes are described as follows: 1. Global certification line: the input line, output line and dimming light are upgraded to the global certification line. The original HLG family plans to use American wire, such as when selling in a specific country (such as China, Australia, Japan, etc.). The wire of the standard product must be replaced according to the requirements of local regulations, and assist the customer to arrange the certification report. In addition to the time-consuming operation process, and the customer must have MOQ requirements for modifying the wire, the inventory and cost are both more troublesome than the standard product. Mingwei has reduced the inconvenience of inventory and cost management caused by regulatory restrictions and wire rod differences, and improved the product application area. It is once again leading the industry and has North American UL, European VDE, China CCC, Korea KC, Australia RCM, Taiwan BSMI. The global certification line certified by Brazil (IEC 60245-4 Cabo), Japan PSE and other countries or regions in the HLG family of products meets the applicable standards of the global certification line [Note 1]; and upgrades to the only one in the world with UL, ENEC and CCC, KC, PSE, BSMI multi-country certification and standard LED power driver with seven-year warranty period can help Mingwei dealer partners and end customers to market inventory management and LED lamps! Second, model stickers Label format change Since the HLG family input/output lines and dimming are imported into the global certification line (specification: SJOW 17AWG 2C H05RN-F 1.0mm2) [Note 1], in order to enable customers to more clearly and easily recognize the input and output. In contrast to the light-adjusting material, Ming Wei also has a new revision of the product label sticker. Please refer to the description on the next page for related revision information. [Note 1] Some models of the HLG family products are still in use of the original wire because the specifications exceed the global certification line regulations. For details, please contact Mingwei's business department or engineering department. Mingwei will continue to focus on improving the market competitiveness of its products. The product certification and update operations have been completed. And the cost added by this upgrade is completely absorbed by Mingwei, and the selling price will not be adjusted. If you have any questions about this product change, please refer to the latest announcement of Mingwei's official website, or please contact Mingwei. Contact the agent. Product upgrade and change instructions Original sticker version New sticker version