High Torque Bmer-300-Mdg2r Can Replace American Parker Cone Shaft Hydraulic Oil Motor

High torque BMER-300-MDG2R can replace American Parker cone shaft hydraulic oil motor

Hanjiu High Torque BMER-300-MDG2R Replaces American Parker Conical Cycloidal Hydraulic Oil Motor

Features:
 
(1) Compact size, high efficiency
 
(2) Low-friction and long life advantages
 
(3) Internal check valves, Escort seal
 
(4) This motor has a rugged housing with an extra large capacity side load bearing
 
(5) Shaft seal can bear high pressure of back and the motor can be used in parallel or series
 
(6) Geroler and drive use the SMT series motors parameter, prolong operating life.
 
 
Specification:
 
Model: BMER1-200-WS-T4-S
Disp. 11.96 cu.in./rev.
Pressure:
2973 PSI(Cont.)
3481 PSI(Int.)
Torque
4691 in-lb. (Cont.)
6310 in-lb. (Int.)
Speed
330 PRM (Cont.)
425 RPM (Int.)
Flow
18.5 GPM (Cont.)
22.4 GPM (Int.)
Rotation Reversible
Mount 4 Bolt Wheel
5.812 bolt circle, 3-1/4" pilot dia
Shaft 1-1/4" tapered*4.21"
shaft w/5/16" key and threaded end
Ports SAE 10
Size 4.94"*5.25"*5.45"
Shpg. 30lbs.
 
YPE    BMSW-315    BMSW-400    BMSW-500    BMSW-630    BMSW-800    BMSW-985
Displacement(ml/r)    314.9    399.7    496.6    617.8    787.4    969.1

Max.Pressure.Drop(Mpa)    cont.    20    20    20    18    16    14
int.    24    24    24    21    18    16
peak.    28    28    28    24    21    18
Max.Torque(N.m)    cont.    873    1108    1385    1570    1773    1900
int.    1119    1440    1783    1951    2122    2133
peak.    1293    1650    2060    2249    2481    2399
Speed.Range(cont.)(r/min)    10-475    9-375    8-300    6-238    5-187    5-154
Max.Flow(cont.)(L/min)    150    150    150    150    150    150
Max.Output.Power(cont.)(Kw)    32    32    32    32    32    24
Weight(kg)    30.7    31.5    32.4    33.6    35.2    37.2





Product application



Shijiazhuang HanJiu technology co., LTD., is specialized in the production of BM series cycloid hydraulic motor, the BZZ redirector enterprise, my factory has dozens of high-quality, professional engineering and technical personnel, and more than in 2010, has introduced the most advanced production equipment, is in northern China's largest factories, production of more than 300000 units a year.
My factory specializes in designing and producing the motors and steering gear of any type, from large to small, from low to high, and so on. And can replace danfoss, Eaton, M+S series models. Products are widely used in engineering machinery, mining machinery, metallurgical machinery, petroleum machinery, agricultural machinery, injection molding machinery, fishery machinery, military engineering and other fields.
My factory take the good faith first, quality first for the purpose, from the employee on-boarding, raw materials into the factory, from parts processing, assembly proposal until products, has a relatively perfect system of product quality. And through CE certification. Our factory is dedicated to the establishment of an internationally renowned brand, looking forward to the long-term cooperation with more demand of hydraulic products.





Please do not hesitate to contact us for further information, inquiries or orders.

Thank you for choosing 'Hanjiu' Hydraulics.

 

Manual Foaming Machine

Manual PU foam making machine

Main Usage:
This machine is mostly used for mixing , stirring and foaming raw material for foam
rubber.Adopting high speed and low speed segment with timing willingly controlled function ,
it also fits parking willingly electron brake device , the Operation is simpler and the foaming quality is better.

Foaming Machine is an economic type of auto batching machine that is used for making all kinds of PU foam.
1. Main machine:
* 200kgs of main mixing tank with Teflon coating
* 15kw motor (Siemens) and 15kw inverter ( Taiwanese Delta)
* 50L of transfer tank with automatic vale for TDI
* 1 set of 3 way pneumatic valve for TDI ( Taiwanese)
* 1 set of 3 way pneumatic valve for water (Taiwanese)
* 1 set of 3 way pneumatic valve for mixture (Taiwanese)
* 1 set of controlling center
* Touch screen ( TL1310/HCFA 10 inch) + PLC ( Mitsubishi) + Electrical components ( Fuji)
2. Metering pumps.
* 1 set magnetic pump DPMY-6/0.4 ( Chinese ) for TDI
* 1 set gearing pump GPY-11.5R ( Japanese) for water
* 1 set gearing pump KCB200(Chinese) for mixture ( PPG+ silicone + tin + amine + CaCO3+color +-)
* And their connecting pipes
3. Tanks.
*1 set of 100kgs tank for water.
*1 set of 1 ton mixing tank for mixture ( PPG + silicone + tin + amine + CaCO3+color +-)
Note: TDI tank just use it`s packing jug directly.
4. Moulding box. ( customized size) 1 set moulding box with carrying wheel.
5. Air compressor: 1 set
6. Electronic scale: 100kgs-1set, 5kgs-1set

Pu Foam Spray Machine,Manual Foaming Machine,Foam Production Machine,Pu Foam Injection Machine

SOFTLIFE MATTRESS MACHINERY CO.,LTD , https://www.machinesoftlifefoam.com