Hot Sale Face Creams Skin Care Vacuum Emulsifying Mixer

  • Model NO.: MZH-V100L
  • Material: 304 or 316L
  • Mix Motor: USA ABB Brand
  • Inverter: Panasonic Brand
  • Vacuum Pume: Siemens Brand
  • Homogenizer Speed: 3600rpm Adjustable
  • Transport Package: Strong Plywood Package
  • Origin: Guangzhou
  • Volume: 150L
  • Mix Speed: 63rpm Adjustable
  • Temperature Sensor: Omran Brand
  • PLC Control: Siemens Touch Screem
  • Homogenizing Motor: USA ABB Brand
  • Trademark: MIZIHO
  • Specification: 1850*950*1750mm
  • HS Code: 847982009
Hot Sale Face Creams skin care Vacuum Emulsifying Mixer
 
DESCRIPTION
MZH-V100L Vacuum homogeneous mixer consists of: oil tank, water tank, vacuum homogeneous emulsifying machine, heating system, mixing system, vacuum system, electric lifting system, operation control cabinet, piping system. It is the most suitable equipment to produce high-grade skin care creams or other creams product
The material moves in a high speed between the rotor and stator, what can engender a strong hydraulic shear power to dispersing materials, meanwhile it can engender  centrifugal power to extrude, milling, crash the material, ultimately make the material mixing, stirring, diminution to the desired requirements. A lighting hole on the pot cover to observe the states of homogeneity. Entrance for spots of material provide possibility to add essence and suchlike materials. Either pour-out the material by tilting the pot or from the bottom, the latter way can make the materials enter the filling machine directly for quantitative filling. Easy to clean.
Control System: The control system is equipped with digital time relay device, so it can adjust time and speed of homogenizer based on different material. All control buttons are concentrated together,clear at a glance.

Hot Sale Face Creams Skin Care Vacuum Emulsifying Mixer

STANDARD CONFIGURATION
  1. Min boiler, water tank, oil tank
  2. Vacuum pump and synchronous solenoid valve
  3. Emulsifier and material filter
  4. Oil pressure lifting system and blending system
  5. Stainless steel operation platform 
OPTIONAL CONFIGURATION
Hot Sale Face Creams Skin Care Vacuum Emulsifying Mixer  
TECHNICAL SPECIFIATION
NO Name Technical parameters Main brand
1 Main pot Design volume: 125L   Working volume:100L  
2 Material &Thickness Inner Layer:5mm (Polishing: 400MESH)
Cover: 10mm,
Stirring blade: 6mm, 		SUS316L
Middle Layer: 5mm; SUS 304-2B
Cotton insulation is expanded perlite  
Out Layer: 3mm (Polishing:400MESH) SUS 304-2B
Pot Bottom: Discharge hole, Temperature detection hole.  
3 Stirring Way Anchor agitator stirring scraper SUS316L 
Scraping blade PTFE material, snapping stirring the pot wall, so the material does not stick pot wall mixed.  
Bottom temperature probe bulb to 20mm can accurately measure the temperature of the material. Temperature Sensor. Omron
Up-mixing Clockwise Moter 2KW   Siemens
Up-mixing Frequency control: 0~63r/min Taiwan Delta
4 Homogeneous Homogenizer as SUS 316L solid stainless steel material, by laser machining process from several species such as helical vane cavity structure and the special work in strict accordance with Japan beauty he company to produce high precision, strong shear.  
Homogenizer Motor :0.75KW  Siemens
Homogenizer Inverter: 0-3400r/min Taiwan Delta
5 Sealing Dharma Blue sealed with silicone rubber O-ring  
Homogenizer using the world famous German high-speed Mechanical seal Burgmann. Germany Burgmann
6 Heating way Steam heating, Water test pressure 0.4Mpa,working Pressure<0.15-0.25Mpa  
7 Discharge way Spout with sanitary pot bottom valve.  
Can through Variety pump discharge.  
9 Vacuum System Using water ring vacuum pump to avoid pump inhale oil, foam etc., causing blockage. Shanghai zhou xin
Vacuum pump Motor: 0.75KW  
Vacuum suction tube is 304-2B connected.  
10 Electric Box Electrical control box for the SUS304-2B, Appearance of sand board.  
Net weight 800kg(Only for standard equipment)  
Power V. 380V,50HZ.  
GMP Standard Machine platform is welded stainless steel square tube. Welding surface polishing treatment. SUS304-2B Prevent slip Plate on the stirs and platform.  
 
Detail pictures below
Hot Sale Face Creams Skin Care Vacuum Emulsifying Mixer

Configuration Details:

No. Name Origin Model Notes
1 Touch Screen Japan, DIGITIL Brand JP-2501-10.4″ PLC
2 PLC SIMENS S7-200 Series PLC
3 Inverter Japan Panasonic BFV100 Series PLC
4 Homogenizing Motor SIMENS 11KW  
5 Reducer motor Chinese Famous Brand 7.5KW  
6 Sight Glass AEROSPACE Brand DN120 With scraper
7 Vacuum Pump China, ZHUOXIN Brand 2BV2-061  
8 Vacuum Pressure meter Beijing, Brady Brand,Sino-US Joint Venture Companies YTNP-60 diaphragm type
9 Temperature sensor   Tianjing, Zhonghuan Brand WZP-235H  
10 Solenoid valve  Taiwan, AIRTAC Brand 4V-210  
11 Low-voltage Apparatus SIMENS    
12 Main Switch France, Schneider   NSC series  
13 Button switch Japan, Fuji    
14 Hydraulic valve Taiwan, Weige    
15 Angle place valve Shanghai, Shengyu    
16 Shaft Japan, NSK    
17 Oil Sealing Taiwan, SOG Fluorous rubber  

 II. Machinery Main Parts
Hot Sale Face Creams Skin Care Vacuum Emulsifying Mixer
III. Our Factory
Hot Sale Face Creams Skin Care Vacuum Emulsifying Mixer

IV. The Main Project
Hot Sale Face Creams Skin Care Vacuum Emulsifying Mixer
V. After Sale Service
1. Warranty time: One year guaranteed for quality, product whole life service any damage except the wrong operation during warranty. Period is repaired freely, But the travel and hotel expenses should
be count on buyer.
2. Commissioning services: The product's installation and commissioning at the demand side, our engineers will not leave there until get your agreement.
3. Traning Services: Our engineers will train your staff in your factory or video to operate it during the period of installation and commissioning, and they will not leave there until your staff can operate it properly and normally.
4. Manintenance Services: Any malfunction happened, Once you inquiry us, We will reply you within
24 hours.
5. The File: The manual specification, report of the material which used to the equipment and other documents video related to GMP authentication information will be provided by us.
 
VI. FAQ
1. Q: Are you factory or trading company?
    A: We are the professional manufacture of cosmetic machinery in China more than 10years.
2. Q: Where is your location?
    A: Company and Showroom located in Guangzhou china, Factory located in Jiangsu and Shanghai
          Province.
3. Q: Are your engineer be able to serve in oversea?
    A: Yes, we have a lot of experience install the machine in oversea.
4. Q: What is your material of your product?
    A: adopt with full stainless steel 304-2b and 316L
5. Q: How does your factory do regarding quality control?
    A: Two years spare parts,and full-life service of our machinery.

Our Company to customer satisfaction for the development of three goals: Product quality, Product technology and After-sales service.

Metal Drawer

Metal drawer series includes the metal drawer on truck or other places, we can produce it according to customized size or design and ODM business are widly accepted.

Truck Metal Box,Truck Metal Cabinet,Aluminum Storage Drawer,Truck Storage Metal Drawer

Foshan Dinghan Electrical Technology Co., Ltd , https://www.fsdinghanelectrical.com