Water treatment Filter Element is a filter element used for water treatment and liquid filtration. It is mainly used to remove suspended solids, sediment, rust and other impurities in water, and improve the cleanliness and transparency of water. The filter element is divided into the following types: PP filter element is also called PP melt-blown filter element, which is a filter element made of polypropylene material, which has good filtering effect and corrosion resistance, and can be used to purify tap water, groundwater, chemical liquids, etc.; The wound filter element is refined by finely winding textile fiber yarns with good filtration performance on a porous skeleton. The yarn materials include polypropylene fiber, acrylic fiber, absorbent cotton fiber, etc. By controlling the winding tightness and thinness of the yarn during winding, filter elements of different precision can be made, which can effectively remove suspended solids and particulate impurities in various liquids, and have a high purification effect on various liquids; folded filter elements , is a deep filter core folded structure, large membrane filtration area, large flux. Low differential pressure, strong dirt holding capacity and long service life. There are a variety of filter fineness to choose from, with a wide range of applications. Good chemical compatibility, suitable for filtering strong acids, strong alkalis and organic solvents. Processed and formed by hot-melt welding technology, does not contain any chemical adhesives, no leakage, no secondary pollution.
Filter Housing And Cartridge,Filter Cartridge,Water Filter Element,Filter Element Hebei Chengda Water Technology Co.,Ltd. , https://www.arclion1976.com
Quick Detail:
1. Material: EPDM, SBR, NR, etc;
2. Usage: Collision avoidance, protect shipboard
3. Shape: Cell Fender
4. Certificate: CE, SGS, BV, CCS, ISO9001
5. Warrantee: 10 years
Competitive Advantage:
L Wide range of sizes
L High efficiency
L Good angular performance
L Modular design
L Well proven design
L PIANC tested and certified
1, E/R-H: 15percent more:
Effectiveness of the fender is designated by E/R· H.
The value of E/R-H of super cell rubber fender is 0.450 which is 15% higher than the 0.383 for the ordinary cell fender.
The combination of super cell fender and new grade of rubber fender helps to make designing more economical.
This super cell fender with the new grade of rubber can be a size smaller but perform as well as a size larger.
2, Wider dispersion of stress:
Super cell fender is improved over the ordinary cell fender at the buckling point and the shape of edge of the leg.
Its wider dispersion of stress has been corroborated by the FEM (Finite Element Method).
The wider dispersion of stress makes it possible to increase the design deflection from 47.5% to 52.5%, resulting in superior performance of the super cell fender, as well as being durable.
3, Well performing at angular berthing:
For selecting a fender system suitable for berthing of large vessels, angular performance is one of the most important factors to be considered.
Description:
1. On the basis that counterforce do not increase, if deflection distance augments by 13%, energy absorption will rise by 17% while counterforce energy absorption ratio (E/R· H) of each unit will go up by 15%.
2. Among stress rubber fender series, TD-A cell fender possesses relatively small inclination and stress change in performance.
3. UHMW-PE frontal pad is fixed in the front of frontal berthing to lower friction coefficient and reduce the shear force in berthing by large margin.
Rubber grade
PerformanceRated deflection 52.5%
Maximum deflection 55%
Reaction Force
(KN)Energy absorption
(KN@M)Reaction force
(KN)Energy absorption
(KN@M)
Super high reaction force (P3)
1175
656
1250
684
Super high reaction force (P2)
1042
574
1108
607
High reaction force (P1)
902
497
960
526
Standard reaction force (P0)
696
382
741
405
Low reaction force (P01)
552
306
590
324