Features:
ER70S-6 is a kind of mild steel copper coated Welding wire, suitable for 100% CO2 and Argon& CO2 mixed gas protective welding with stable feasibility, good welding seams, less spatters and excellent welding process properties.
Application:
Used to weld ship building steel(A,B,D,E,A36,D36,E36)and equivalent mild steel or 550Mpa grade mild alloy steel, such as container building, construction machine, railway construction, pressure vessel for semi-auto or automatic gas shielded welding.
1. Wire into the plant must be stored in dry conditions, can not open welding wire coil waterproof packaging.
Copper Plating Welding Wire ,Mig Welding Copper Wire,Copper Plating Wire,Copper Plating Welding Wires Jiangyin Vankey Machinery Technology Co.,Ltd , https://www.wkweldingwire.com
It's a new polymer synthetic material between rubber and plastic, with both high strength of plastic and long range elasticity of rubber.
1. High wear resistance. 3-5 times that of natural rubber
2. High oil resistance, 4 times that of NBR-Nitrile butadiene rubber
3. High mechanical strength. Its tensile stress at break, tear strength and load bearing ability are many times higher than those of common rubber.
4. Excellent resistance to acid, alkali, low temperature and solvent.
5. High metal-bonding strength
6. Wide hardness range. It can be adjusted at will within elastic domain Shore A 10- Shore A 100
The most distinguishing characteristics of foam filled fender:
1. Having the capability of floating, not easily influenced by the ebb and flow of the tide.
2. Bright colors. Various colors are offered according to the customers' demands.
3. Compared with inflatable fender, it boasts the characteristics of safety and maintenance-free with working life as long as 10 to 15 years, wanting no inflating, resistant to scratching, pricking, friction, sea water, acid and alkali.
4. Solid but light, easy to install and move.
5. When compressed to 60%, reaction force grows obviously from little to largeness, and energy absorption is very high.
2. Welding shall be removed before welding surface oil, rust, water and other impurities.
3. The CO2 gas protection, CO2 gas purity 99.98%.
4. CO2 welding protective gas flow rate should be controlled at 20~25L/min.
5. Wire extension length should be controlled in the range of 15~25mm.
Marine Fender Rubber Fender Foam Filled Fender
Engine: No Engine
Engine Type: No Engine
Usage: for Ship or Dock
Certification: CCS
Trademark: Yutung
Transport Package: Nude Pack
Specification: As Per Your Requirement
Origin: China
HS Code: 8907900090
Foam filled fender is our most new products, we can supply all of the colors.