Plastic Film Dewatering Drying Machine
Plastic Film Dewatering Drying Machine is used after the plastic film/plastic agricultural film/PP woven bags/Space bag/tons bags/thin waste plastics plastic sheets washed,using the squeeze dewatering principle,squeeze the water from the plastic by rotating screw.The water will flow out from the bottom,the plastic will get hot by high intensity extrusion friction,and will plasticizing mildly after the mould heating.Finally the blade will cut the granules from the mould.
Advantage of squeezer dryer plastic machine:
1. Low power consumption. Main motor power between 90kw, no need to connection drying pipe system. Compare transitional horizontal dewatering machine+drying pipe system, can save power 40-50%
2. Small land occupied
3. Low rotation speed, almost no noise.
4. Dewatering function is better, final products humidity less then 3%
5. After squeeze dry granulating machine, the material can put into granulator driectly, do not need the forced feeding machine.
6. Mechanical squeeze dewatering,compared with the original hot air drying, do not need use dewatering machine, drying system and the agglomerator machine,it can save the energy greatly.
Plastic Film Dewatering Drying Machine,dewatering plasticplastic dewater machine,dry plastic dewatering machine zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstarmachienry.com
It is reported that at the 2015 China International Maritime Exhibition held on December 1st, DEKO will launch a new fireproof glass partition wall and glass door. The system is easy to install and saves shipowners a lot of installation time. These glass partition walls and glass doors are built for tankers, cruise ships, ferries and drilling equipment.
DEKO will launch new fireproof glass partition walls and glass doors
The new project was carried out in accordance with the regulations currently established by the International Maritime Organization. Compared to competitors' products, DEKO's patented frame system is lighter and narrower, with a performance of 50% lighter and 25% narrower.
Karsten Thiim, export manager of DEKO, said, “These glass partition walls and doors are much lighter and narrower than other similar products on the market, which makes the installation very convenient and simple, thus saving the ship owners a lot of installation time. And also saved a lot of fuel costs."
KarstenThiim pointed out that “Asian countries, especially China, need fire-resistant glass partition walls and doors that meet the new regulations. This means that suppliers must meet these needsâ€.
The product design is based on DEKO's 45 years of onshore operations experience.
KarstenThiim also stated, “With our extensive experience, we have designed this high-quality fire protection system and supplied these systems to ship owners at competitive prices. This product is mainly for general cargo ships, cruise ships, ferries and Drilling equipment design".
DEKO is one of the world's leading suppliers of lightweight partition walls and doors. In addition, the company is also skilled in the interior decoration of industrial buildings and public institution buildings.