A coffee grinder with a cone-knife grinder places a conical knife disk at the bottom of the machine, and then cooperates with the outer ring knife disk for grinding. The coffee powder produced in this way will be closer to granular, and at the same time, the water absorption path of the coffee particles will become longer, and it will take more time for the inside to contact the water, which will result in the coffee powder being released within the first time. The soluble substances are less, and the concentration will not be too high in a short time. Conical Coffee Grinder,Conical Burr Coffee Grinder,Small Conical Burr Coffee Grinder,Brim Burr Coffee Grinder Zhongshan Dippers Electric Co., Ltd. , https://www.cndippers.com
As a result of another round of investment boom in the tire industry, especially the development of radial tires, the demand for rubber machinery has rapidly increased, making the rubber machine industry a rare supplier market. The vast majority of rubber machine manufacturers have full production tasks, and they are working overtime at full capacity throughout the year. Some companies can only rely on increasing foreign commissioned processing efforts to meet market demand and ensure that “supplies†become the top priority for the 2007 rubber machine manufacturers.
According to the statistics of the Rubber Machinery Committee of the China National Chemical Equipment Association, the sales revenue of 29 rubber machinery companies has increased to varying degrees last year, and the growth rate has remained mostly at around 20%. The largest increases were in southern China and Shaoxing sincerely, achieving sales revenue doubled; Yiyang Rubber Machinery, Qingdao Higher Education Software Management, Dalian Rubber and Plastics, Beijing Jingye, and Qingdao Double Star Machinery increased by more than 40%; industry production and sales rate reached over 99%. The rate of production and sales of most enterprises is 100%. In addition, rubber machine companies involved in non-rubber machine products also made great progress, non-rubber products sales revenue of about 1.7 billion. Non-rubber products developed better include Jiangsu Shuangxiang Group, Double Star Machinery, and Beijing Aviation Manufacturing.
The Chinese rubber machinery industry experienced the rapid development of “blowouts†in 2003 and 2004. After the soft landing in 2005 and 2006, it again achieved a leap-forward development in 2007, and the industry’s overall strength appeared a leap-like increase, which was embodied in three aspects. :
First, the ability to earn foreign exchange through exports has increased substantially. The statistics on foreign exchange earnings from exports of 29 rubber-machine enterprises in 2007 were 94 million US dollars, an increase of 24.7% over the previous year. A total of 10 rubber machine manufacturers have exported goods worth more than 30 million yuan, and three companies such as Yiyang Rubber Machinery, Dalian Rubber and Guilin Rubber Machinery have surpassed the one-hundred-million mark. So far, the world's top ten tire companies have all used Chinese rubber products, and Chinese rubber machines have a high reputation and influence in the world. Second, the profitability of the company has increased substantially. From the reported profit statistics, the profits of 29 rubber machine manufacturers in 2007 increased by 37.7% over the previous year. There are 11 rubber machine companies with profits exceeding 10 million yuan, and only 1 company has a small loss. Third, the company’s ability to innovate in science and technology has increased According to the statistics on sales revenue of new products, the sales revenue of new products of 29 rubber machinery enterprises in 2007 increased by 24.2% over the previous year. The sales revenue of new products of Tianjin Saixiang, Guilin Rubber Machinery and Yiyang Rubber Machinery exceeded 50% of the total sales revenue. In addition, the industry’s awareness of patents has increased. Under the demonstrations of Tianjin Saixiang and Guilin Rubber Machinery as two state-level patent pilot companies, the Chinese rubber industry has initiated a small upsurge in patent filing and protection. More than 50 new patents have been added throughout the year. Home companies broke the record of zeros in patents. The four companies of Tianjin Saixiang, Guilin Rubber Machinery, Yiyang Rubber Machinery, and Qingdao College Software Control were selected as state-level technology centers and became a beautiful landscape in the industry, showing that the Chinese rubber machinery industry has gradually established its own scientific and technological innovation system and has achieved comparative advantages. Strong scientific and technological innovation capabilities.
China Rubber Machinery has "fired" for another year
In 2007, China's rubber machinery industry was booming. The economic indicators such as output value, sales revenue and foreign exchange earned through exports all set the record for the best in history. The overall strength and benefits of the company have increased significantly. According to statistics of 29 major rubber machinery enterprises in the country by the China National Chemical Equipment Association’s Rubber Machinery Professional Committee, the sales revenue of 29 enterprises reached 5.779 billion yuan, an increase of 15.4% over the previous year; as a result, the total sales revenue of rubber machinery in the country reached 8.1 billion. Yuan, an increase of 12.5% ​​over the previous year, and foreign exchange through exports exceeded 100 million U.S. dollars. China Rubber Machinery has achieved substantial growth in sales revenue for five consecutive years.