1. The treatment effect is good. After treatment, the water quality is clear and transparent, and the indicators meet the first-level discharge standard of “Integrated Wastewater Discharge Standard†(GB8978-1996). Polyurethane System For Tyre Wheel Pu Wheel Chemicals,Wheel Polyurethane Casting Resin,Polyurethane Foam Type,Custom Wheel Pu Materials XUCHUAN CHEMICAL(SUZHOU) CO., LTD , https://www.xuchuanchem.com
2. The project investment is small. Take the daily treatment of 10,000 tons of sewage plant as an example. The total investment of traditional technology is about 12-20 million yuan, while the nano-microporous diatom concentrate sewage treatment process only needs 6.8 million yuan, saving investment 40- 60%.
3, the operating cost is low, the traditional process operating cost is generally not less than 0.7 yuan / ton, and the processing cost of using this process is less than 0.35 yuan / ton.
4, the floor space is small, taking the daily treatment of 10,000 tons of sewage plants as an example, the traditional process generally needs 8-10 acres, and this process only needs 1 mu, saving 90% of the land.
5, easy to manage, this process is simple, high degree of automation, easy to control, and fewer management personnel.
6. There is no secondary pollution. The sludge using this process can be recycled and used without causing secondary pollution.
7. The handling load is strong and the impact resistance is strong. The small changes in water quality and water quantity have little effect on the treatment effect of sewage.
8. It is affected by temperature. This process is suitable for both the cold of the north and the heat of the south. The change of water temperature during the treatment process does not affect the treatment effect.
9. The construction period is short. Take the construction of a sewage treatment plant with a daily capacity of 10,000 tons. The construction period is only 180 working days, while the traditional method requires at least one year. 