Plastic Oil Type Mold Temperature Controller for Injection Mould

  • Model NO.: MTCO-3~MTCO-12
  • Heating Power: 9kw
  • Trademark: SHICA
  • Specification: 750*400*700mm
  • Control Temerature Range: Environment Temp. to 160 Centigrade
  • Fluid: Heat Transfer Oil
  • Transport Package: Wooden Package
  • Origin: China
Mould Temperature Controller 
Plastic Oil Type Mold Temperature Controller for Injection Mould
 
FEATURES:
*The temperature control adopted Japanese. Germany,Taiwan.Precise and reliable,
  if can control within +- 1ºC and save electricity over 35%.
*Two sets of electric heater cylinder made from stainless steel.
*Emplaying supeb imported components,with longer terms of service.
*Rapid heating and cool off speeds,temp kept stable at times.
*Complete with safety protection and indication system.
*PLC control panel
 
Specifications Water Type Oil Type
Model MTCW-3 MTCW-6 MTCW-9 MTCW-12 MTCO-3 MTCO-6 MTCO-9 MTCO-12 MTCOH-6 MTCOH-12
Control Temp. Range Environment Temp. to 100ºC Environment Temp. to 160ºC Environment Temp.  to 200ºC
Voltage 3PHASE  380v   50Hz or 60Hz 3PHASE  380v   50Hz or 60Hz
Cooling Methold Direct Cooling Indirect Cooling
Fluid Clean Water Heat Transfer Oil
Heating Capacity KW 3 6 9 12 3 6 9 12 6 12
Pump Power 0.375 0.375 0.375 0.75 0.375 0.375 0.375 0.75 0.375 0.75
Flow Volume(L/MIN) 80 80 80 110 60 60 60 90 60 90
Cooling Water Pipe/inch 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2
Process Fluid Pipe/inch 1/2*4 1/2*4 1/2*6 1/2*8 1/2*4 1/2*4 1/2*6 1/2*8 1/2*4 1/2*8
Dimension L*W*H(mm) 650*340*580 650*340*580 650*340*580 750*400*700 650*340*580 650*340*580 750*400*700 750*400*700 650*340*580 750*400*700
Weight 54 54 72 90 58 58 75 95 58 75

High Frequency Welding Machine

High frequency welding machine applications

It`s suitable for welding Blister&Blister, Blister&Paper card, Paper card&Paper card. Widely used in stationery, toys, electronic products, hardware, cosmetic etc.What's more , it's also suitable for  PVC, PE, PET, PETG, PP, PC, PS, HIPS, APET and so on.


High frequency welding machine features

1. Using vacuum tubes, the output power is stable and reliable. 

2. Sensitive spark over-current protection circuit. Can effectively cut off due to damage to host large current output, suppress sparks. 
3. Has a frequency stabilizer and high frequency shielding devices, the high-frequency interference to a minimum. 
4. Manually adjust the mould by the four corners horizontal adjustment, adjust die easily.
5. Can be automatically completed secondary welding process, improve work efficiency.
6. Stepless temperature heating system, make work more efficient.

7. Automatic over-current protection system, increase the service life of vacuum tubes, protect the mould.

8. International standard industrial band of 27.12 MHz..

High Frequency Welding Machine


High Frequency Fabric Welding Machine

High Frequency Welding Machine

High Frequency Welding Machine,Handheld High Frequency Welding Machine,High Frequency GTAW Welding Machine,High Frequency Fabric Welding Machine

ShenZhen Hengxing Machinery Factory , http://www.szchxjx.com