There is a problem with smoking in the vacuum suction truck, and the status of the problem is also very variable. However, when some novice drivers encounter such emergencies, most of them are panic-stricken, fearing that there will be something extremely annoying. When we encounter such a situation, we do not need to be too panicky. We can use different colors of smoke to judge the degree of failure. If it is the case of black smoke, it is more common in carburetor vacuum suction vehicles. Because the fuel consumption of those models with carburetor is not controlled by the use of on-board computers, they all use the accelerator pedal to control. In the process of driving, if too much fuel enters the cylinder, it will be excluded if it is not burned, and this will form the black smoke that we often see. If blue smoke is emitted, then it may be because the cylinder pad of the engine cylinder of the vacuum suction truck has worn out. Then there will be a corresponding gap, resulting in the water of the heat-conducting heat-dissipating system of the vacuum sewer truck entering the combustion chamber. Water cannot be burned. After it is exposed to temperature, water vapor is generated and discharged directly from the exhaust pipe. At this point, the explosive power of the vacuum sewer car will be reduced, noise, and acceleration will become powerless, the exhaust pipe will emit blue smoke, and is accompanied by a burning smell. When the age of the vacuum suction truck is relatively old, it is necessary to constantly check the components of the piston and the cylinder, etc., in order to check whether the seal is intact or not. When there is a blue smoke, it is necessary to immediately Go to a professional repair shop to perform related checks. When blue smoke is emitted, most of them are caused by various internal failures of the engine, causing the oil to enter the combustion chamber and form blue smoke. The more common conditions are these: the vacuum sealer piston seal is not good, the cylinder wall scratches, the valve appears more serious wear will cause a gap, and it was originally attached to the lubrication of the engine oil at this time After passing through these gaps, the combustor will be used to cause combustion, and those oils that do not come out will be discharged to the vacuum suction truck . This will cause blue smoke.
Aluminum Ultra Flat Sheet is a special kind of Aluminum Sheet.It has high standard on surface flatness.As a result Aluminum Ultra Flat Sheet is suitable using in the electronic products surface parts or those application which has high requirement regarding the surface conditions.The advantage of aluminum sheet is as follows:
1. Easy to process. Flat Aluminum Plate, 6061 Aluminum Sheet, Aluminium Flat Sheet, Ultra Flat Aluminum Sheet Trumony Aluminum Limited , https://www.szaluminumcoil.com
2. Good conductivity and thermal conductivity.
3. The density is small.
4. High strength.
The strength of aluminum and aluminum alloy is high. The matrix strength can be strengthened by cold working to a certain extent, and some brands of aluminum alloy can also be strengthened by heat treatment.
5. Good corrosion resistance.
The surface of aluminum is easy to produce a dense and firm protective film of Al2O3, which can protect the substrate from corrosion.