The rapid recovery of traffic on the scene of the accident depends on the professional emergency repair of the accident wrecker. Although it has always played a low-key role in the smooth passage, it is often due to emergency operations and swift action. Therefore, it is very important that the performance of the wrecker is always maintained at the best standby state. All this is based on the correct care when using it. First, before the accident wrecker is present, it is necessary to fully understand and analyze the wrecker site and the wagons to be cleared. Select an accident wrecker that matches the model and dispatch it for repair. When driving to the scene, pay attention to the separation of the vehicle power device Second, after the accident wrecker has gone to the scene of the accident, it is necessary to pay attention to observing the traction direction of the dragging object, and press the specified sign of the action sign to start slowly and steadily. If the to-be-cleared object needs to be hoisted, the winch clutch must not be separated when manipulating the boom, winch or other mechanical components. Suspended wire should be provided with a sufficient length of safety, the minimum standard is five times the circumference of the drum of the winch drum. It is best not to change the length and other parameters of the boom during traction, and to use a winch wire to slowly roll up the traction. Pay attention to the fact that the jib should not be overloaded so as not to cause damage to the jib and cause vehicle safety problems. Third, if you use the lift arm drag, you should pay attention to the choice of lift position should be selected in the most stable place. At the same time try to reduce the length of the lifting arm before driving. The lift should be fastened to the fixed part of the car body with a strong strap or chain, thus avoiding the unstable factors such as bumps or brakes when dragging, causing the accident car to disengage from the bracket and causing the vehicle and the wrecker to both Different degrees of damage occurred. When driving, it is necessary to avoid sudden changes in the emergency brakes, and try to slow down and steer as much as possible. 4. If the wrecker has been cleaned up for too long, the hydraulic oil temperature should be monitored at all times. Especially when the sun is exposed to direct sunlight, the temperature of the hydraulic oil can easily rise to more than 60 degrees. During the operation, attention should be paid to lengthening the rest interval or adopting various cooling methods to keep the hydraulic oil temperature at a normal value. The use of accident wreckers requires the operator to be familiar with more details of the operation. Only in this way can the wrecker be able to meet the speed and safety of the wrecker. The granulator machine can make granules from wet powder materials or break down the dry lumpish material, which is widely used by the industries of pharmacy, chemical and foodstuff. By driving of mechanism, the cylinderis swinging to-and-fro to force the target material squeezed from sieveto make out granules or to smash it as granules. This granulation machine is made of stainless steel, in line with GMP standards. Granulator Machine,Pelletizer machine,Pelletizing Machine,Dry Granulator,Granulation Machine JIANGYIN CITY XUAN TENG MACHINERY EQUIPMENT CO.,LTD , https://www.xuantengmachine.com
