Fishing Boat Ship Docking Marine Pneumatic Rubber Fender

All kinds of Marine Rubber Fender For boat

Product Introduction of Marine Pneumatic Rubber Fender     

 

Marine Pneumatic Rubber Fender also called pneumatic fender, rubber fender, yokohama fender,made by rubber & multi layer of rubber-dipped tyre fabric, is a leading anti-collision device for marine application in the world today. 

  Marine fenders have become an ideal ship protection medium against collision among ship-to-ship (STS), ship to quay (STQ) and ship-to-berthing (STB), they are widely used for large tankers, vessels, docks, harbor wharfs and ocean platforms.

1.What is floating pneumatic boat fender with tire chain ? ocean guard marine fender

Fender which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the water and work as a shock absorber between two ships or between ships and berthing structures when they come alongside each other on the water.

Note:The fenders sometimes be colloquially  referred to as "Yokohama fenders" or "yokohama type fenders".These are examples of suitable products available commercially.

There is a picture to show how Pneumatic rubber marine fender working-----

2.Product Structure-  pneumatic boat fender with tire chain   yokohama fender price

The raw material of the Pneumatic rubber marine fender is natrual rubber +synthetic-tyre-cord fabric

Application of Marine Pneumatic Rubber Fender                    

 --Oil and gas tankers

 

 --Fast ferries and aluminium vessels

 

 --Temporary and permanent installations

 

-- Rapid response and emergencies

 

Features of Marine Pneumatic Rubber Fender                         

 

1.Can support large panels

2.Very low reaction and hull pressure

3.Suitable for small and large tidal ranges

4.Maintains large clearances between hull and structure

Specification:

1)Outer rubber layer

Rubber layer that covers the outside of the fender to protect the cord layers and the inner liner rubber from abrasion and other external forces.  

2)Inner rubber layer

liner of a rubber membrane that seals the pressurized air inside the fender.(In general,we will make some inner rubber container in advance and inflate them.few days later,we will test the pressure again.The one which it's pressure did not change is good one.We will put it into store and when clients order we can use it directly.This can ensure every fender we send to client is airtight one)

3)Synthetic-tyre-cord layer for reinforcement layer yokohama fender price

layer made of synthetic-tyre-cord fabric which maintains the internal air pressure of the fender.

4)Flange opening yokohama fender price

which is mounted on the fender to which an air valve can be adapted.(our flange are all Embedded welding, very stable)

5)Initial internal pressure  yokohama fender price

Air pressure at which an uncompressed fender operates.

yokohama pneumatic fender

2.There are two types Pneumatic rubber marine fender  : yokohama fender price

1)Sling-type fender:fender which is designed to be used without a protection net.

2)Net-type fender:fender which is covered by a protection net consisting of chain and

with tyres or rubber sleeves. yokohama pneumatic fender

why choose us?

1. Advanced production equipment and experienced manufacturing teams 

2. Completed in-house test equipment and strict quality control system

3. Reliable product quality and competitive price

4. Complete customer service and perfect after-sale service

Contact us to know more!


 

PVC Pipe Making Machine

pvc pipe making machine consists of conical twin-screw extruder, vacuum forming equipment, Haul-off machine, cutting machine, stacker and other components, with good stability, and produced high, easy to operate, reliable. The production line can produce water supply and drainage pipe, the material is U-PVC, C-PVC, large diameter PVC. Configure the secondary shunt mold, with a low temperature. Extrusion in low pressure; water membrane sizing, to ensure high-speed pipe production.

Process Flow PVC Pipe Machine:
Material →Mixer →Forced Feeding →Conical double screw extruder →Mould&Calibrator →vacuum spay cooling tank →printer→haul-off →cutter →stacker

Features of our machine PVC Pipe Making Machine:
1. Model KRSJ series conical twin screw extruder is a kind of special equipment for extruding PVC compound. With different

kinds of molds and auxiliary machines, it can produce all sorts of PVC plastic pipe, profile, plate material, sheet material, bar material and granulation.

2. The conical twin screws have applied oil cooling system. Barrel is cooled by special wind cooling system.
3. The conical twin screw extruder system has applied special computer control. According to customers requirements, most reasonable structure of conical twin screw can be made so as to achieve best plasticity performance and material quality.
4. The conical twin screw is made by high precision special digital screw miller; extruding property can be highly harmonized. It has firstly introduced advanced technique of producing screw with variable pitch and depth, so that the material can be more softly sheared and cut.
5. The distribution box is specially designed, pull force bearing is fully imported, and the drive life span can be prolonged. It can bear larger extruding pressure.
6. The electrical system has mainly applied imported parts, it has multiple alarm system, and there are few problems which can be easily eliminated. The cooling system has applied special design, heat emission area is enlarged, the cooling is rapid, and temperature control tolerance can be ± 1degree.

Pvc Pipe Making Machine,Pvc Pipe Manufacturing Machine,Plastic Pipe Making Machine,Pvc Pipe Making Machine

KonRun Intelligent Machinery(Ningbo) Co., Ltd. , https://www.konrunmachine.com