Down Flush Manual Water Softener Valve

Model NO.: MSD2
Trademark: keman
Transport Package: Form Carton
Specification: CE, RoHS, WQA
Origin: Zhejiang
HS Code: 84219910
Down Flush Manual Water Softener ValveDown flush Manual water softener valve 2T/H 
Down Flush Manual Water Softener Valve

Water Filtration Valve
Water filter valve
Water filteration automatic control valve
Manual flush water filter valve
Manull Water Softener Valve
Automatic up-flush valve 
Automatic water softener control valve

Controller model: Timer and Flow limit type
Up/Down-flow
Automatic water softener control valve
Work pressure: 0.1~0.8Mpa

Transformer input: 100~240V / 50~60Hz
Working power:24V/1.6A
Work water temperature: 5~45° C

Highly Efficient Residential water softener
Domestic Softener control Valve
DIY Household water softening valve
Wonderful  water softener controller
 Specifications:
Control system:Runxin TM.F65D (Multiple Timer&Flow meter controller)
Water source:Municipal tap water(Hardness≤220ppm)
Water temperature:5~45°C
Water pressure:0.15~0.6MPa
Quantity of resin:12.5L
Soften material:Risen(PUROLITE)
Output capability:1.0-2.0 m³/h
Default regeneration startup time:2:00am
Default regeneration time:50min
Regeneration period:0~30Days
Ratedvoltage/Frequency:100-220V/50-60Hz
Regeneration method:Automatic
Water pipe interface:G3/4″ F  (with Bypass)
Waste water pipe interface:1/2" M (Φ12)
 Introduction:
High flow rate and sofen water effectively, automatic operating, automatic regeneration.
24 hours control and monitoring with a timer, automatically regerate the medial bed at the system's set time of regeneration according to the set regeneration frequency or the water hardess and the balance volume.
 About the warranty
1.Full Set (filter media,resin) With Box
2. one year warranty 
Regeneration  Manual
Inlet*outlet port  1/2",3/4",1"
Drain port 3/8"
Resin pipe 2.5"
Water Capacity 2T/H, 4T/H, 10T/H
Bypass optional
Working pressure 1Bar~8Bar
Power 24V

Tungsten Carbide Roll Rings

Tungsten Carbide Roll Rings, also known as hard alloy roller ring, has been widely used in the rolling production of high-speed wire, bar, threaded steel, seamless steel pipes, etc. due to its good wear resistance, high-temperature hardness, heat fatigue resistance, thermal conductivity, and high strength.
The Tungsten Carbide Roll Rings we produce mostly come in two series: WC Co and WC Co Ni Cr, with Co and Co Ni Cr as binders ranging from 6wt% to 30wt%. From a usage perspective, hard alloy rollers have good comprehensive mechanical properties, with a bending strength of over 2200 MPa and an impact toughness of (4-6) × At 10 ^ 6J/m ^ 2, the Rockwell hardness (HRA) can reach 78~90. During the high-speed wire rolling process, the single groove steel passing amount is much higher than that of cold hard cast iron or high-speed steel rollers.

Tungsten Carbide Sleeve,Tungsten Carbide Roller, Steel Rebar Rolling,Steel Wire Rod Rolling,WC Roller

Luoyang Golden Egret Geotools Co., Ltd , https://www.lyshieldcutters.com