The rapid recovery of traffic on the scene of the accident depends on the professional emergency repair of the accident wrecker. Although it has always played a low-key role in the smooth passage, it is often due to emergency operations and swift action. Therefore, it is very important that the performance of the wrecker is always maintained at the best standby state. All this is based on the correct care when using it. First, before the accident wrecker is present, it is necessary to fully understand and analyze the wrecker site and the wagons to be cleared. Select an accident wrecker that matches the model and dispatch it for repair. When driving to the scene, pay attention to the separation of the vehicle power device Second, after the accident wrecker has gone to the scene of the accident, it is necessary to pay attention to observing the traction direction of the dragging object, and press the specified sign of the action sign to start slowly and steadily. If the to-be-cleared object needs to be hoisted, the winch clutch must not be separated when manipulating the boom, winch or other mechanical components. Suspended wire should be provided with a sufficient length of safety, the minimum standard is five times the circumference of the drum of the winch drum. It is best not to change the length and other parameters of the boom during traction, and to use a winch wire to slowly roll up the traction. Pay attention to the fact that the jib should not be overloaded so as not to cause damage to the jib and cause vehicle safety problems. Third, if you use the lift arm drag, you should pay attention to the choice of lift position should be selected in the most stable place. At the same time try to reduce the length of the lifting arm before driving. The lift should be fastened to the fixed part of the car body with a strong strap or chain, thus avoiding the unstable factors such as bumps or brakes when dragging, causing the accident car to disengage from the bracket and causing the vehicle and the wrecker to both Different degrees of damage occurred. When driving, it is necessary to avoid sudden changes in the emergency brakes, and try to slow down and steer as much as possible. 4. If the wrecker has been cleaned up for too long, the hydraulic oil temperature should be monitored at all times. Especially when the sun is exposed to direct sunlight, the temperature of the hydraulic oil can easily rise to more than 60 degrees. During the operation, attention should be paid to lengthening the rest interval or adopting various cooling methods to keep the hydraulic oil temperature at a normal value. The use of accident wreckers requires the operator to be familiar with more details of the operation. Only in this way can the wrecker be able to meet the speed and safety of the wrecker. Turbine High Speed Spiral hard Door
Hard turbine speed door: set energy-saving insulation and efficient wind environmental seal in a new metal industrial doors , opening speed of up to 1.5meters per second , For applications that require frequent rapid opening of the logistics channel , Insulation thickness 0.7mm aluminum door intermediate polyurethane foam , total thickness 40mm door wide 185mm per meter weight 1.63KG, Having good thermal insulation and light weight impact strength and other characteristics , wind rating of greater than 12 and theft , The door is suitable for indoor and outdoor fast-track logistics and production , The door type for enterprises save a lot of energy due to air flow generated loss than ordinary industrial sliding doors shutter doors save energy about eighty percent , Rapid opening and closing of the door so that enterprises in the rotational speed of the production and logistics of the door is greatly improved enterprise logistics and production must pass through the channel selection and its use is directly related to the efficiency of production and logistics , This product has high reliability , practicality and easy operation and quick fix for me , Drive control using a stable energy-effcient and accurate hard to guarantee fast and reliable operation of the door system the door to ensure trouble-free operation every year more than 250,000 times
High Speed Spiral Hard Doors, fast opening garage doors, high speed garage doors, high speed metal doors, high speed aluminum doors SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , http://www.hongfarrud.com
