Steel Structure Door Frame Roll Forming Machine

Model NO.: steel structure Door frame roll forming machine
Control System: PLC Computer Control with Inverter
Cutter Standard: Cr12 Roller Standard Cr12
Color: Blue/Red / Green /Gray
Roller Material: 45# Forged Steel, with Hard Chrome Plating
Effective Width: 750-900mm
Power: 4.5 Kw
Application: Machinery & Hardware
Size of Container: 20 FT
Frame Material: 300 H Beam
Trademark: Tianyu
Transport Package: Tighten to Container with Steel Wire Rope
Specification: 7500*1000*1500mm
Origin: China(Mainland)
HS Code: 8462219000

machinery : steel structure Door frame roll forming machine 

The specification of Door frame roll forming machine
 

Steel Structure Door Frame Roll Forming Machine

Components of Machine

1.Automatic hydraulic uncoiler(according the machine and your requirement);

2.Entry Bench;

3.Feeding Section with guide;

4.Main forming machine;

5.PLC control system;

6.Cutting blade;

7.Product Rack;

8.Pressing device;
 
No. Main parameter of light gauge steel frame machine
1 Production CD 60 27;UD 27 23
2

Roller station

 12 rows
3 Dimensions 4500*800*800mm
4

Power

 4KW
5

Thickness of the plate

 0.2-0.6mm or 0.6~1.0mm
6 Productivity 25m/min
7

Middle plate thickness

 20mm
8

Diameter of shaft

 45mm
9

Diameter of roller

 100mm
10

Weight

 About 3T
11

Voltage

 380V 50Hz, 3 phase
12 Cutter Material Cr12
13 Roller Material GCr15
14 Transmisson Gear box

Product show

Steel Structure Door Frame Roll Forming Machine
Steel Structure Door Frame Roll Forming Machine
Steel Structure Door Frame Roll Forming Machine
Steel Structure Door Frame Roll Forming Machine

Features

  • Cutter Material: Cr12MoV1 mould steel with heat treatmen; 
  • Shaft Material: 45# mould steel with heat treatment;
  • Roller Material: 45# mould steel with heat treatment, hard Chrome Coated;
  • Have fashionable, nice appearance and durable;
  • Payment Term: 30% deposit and balance before delivery;
  • Widely used in various industrial factory, villa building, civilian building, warehouse, etc.

 

FAQ
Q:How is this machine's service life?

A:In the normal maintenance,the service life at least 8 years.

 

Q:How to maintenance?
A:If using frequently,best coating lubricant on the chain and two ends of the shaft every month,

replace the hydraulic oil every 1-2 years.

 

Q:What can you do if the machine broken?
A:Our machine's warranty period is 1 year,

if the broken parts can't repair,we can free send the new parts replace the broken parts to you except the solenoid valve,the solenoid valve you must pay the express cost yourself.

if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.

 

Q:Can you be responsible for transport?
A:Yes,please tell me the destination port or address.we have rich experience in transport.

 

Q:Mr.Alan,can you make the machine according to my design or proto type? 
A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us.

 

Q:How many workers operate this machine to manufacture?
A:Only 1-2 worker.

 Contact me
 

Gasification Plate

Gasification board or gasification groove is an auxiliary part of intermediate bunker, ash bucket, flat-based warehouse and cone-based warehouse. It is usually installed at the bottom of material storage warehouse or one side of ash bucket. By connecting preheated air during unloading, this equipment can fluidize powdery material which enhances fluidity of material. This will smoothen the unloading process and avoid particles arching or bridging.

Gasification Equipment,Equipment By Biomass Gasification,Gasification Power Plant Equipment,Coal Gasification Equipment

Rongxin Environmental Protection Equipment Co., Ltd. , https://www.jsrxceramics.com