Mixer For Bathtub,Bathtub Water Mixer,Bathtub Shower Mixer,Bathtub Mixer With Hand Shower Kaiping City Yibiao Sanitary Ware Co., Ltd. , https://www.faucetsaoli.com
Bimetal traps work principle
The main part of the bimetallic trap is a bimetallic temperature sensing element, which is heated and deformed with the rise and fall of the steam temperature to push the valve core to open and close the valve. Bimetallic trap with adjusting bolt can be adjusted according to the need to use the temperature, the general range of subcooling is below the saturation temperature of 15 ℃ -30 ℃, the back pressure rate is greater than 70%, can row non-condensable gas, not afraid of freezing, Small size, can withstand water hammer, high pressure, can be installed anywhere. Bimetal fatigue, need to be adjusted often. When the device is just started, the pipeline appears low temperature condensate, bimetal is flat, the valve core in the spring force, the valve is in the open position. When the condensate water temperature gradually increases, the bimetallic temperature sensor starts to bend and deform and push the valve spool to the closed position. Traps begin to close before the condensate reaches its saturation temperature. Bimetal changes with the steam temperature control valve switch, steam drainage.