Fast PVC rolling door can be designed according to the needs of customers. These doors can be used in firms, inside or outside. The fact that it is not used on a fixed area provides a flexible usage possibility. According to the needs of the firms, they can easily choose PVC rolling doors in the building areas. In addition, it can be used in exterior areas and provides a wide usage area. Fast PVC rolling door can be produced by coating fabric. The different colors of the fabric can be helpful in separating parts of the business. The function of the tarps is not only aesthetic, but also contributes to the protection of the door system against impacts. Since the impacts of the fabric do not come into direct contact with the door surface, it is inevitable that the door will be protected and long-lasting. The fabric can be a very important material so that the door receives as little damage as possible from impacts. Of course the fabric is resistant to a certain level of impact and there is also the possibility of damaging the fabric. You can contact our company for repair of PVC Fabric Roll Up Door. Standard: 0.7 m/s It can be increased up to Maximum opening: 1.5 m/s Maximum closing: 0.4 m/s Aluminum wind rail: 35km/h Brands: Mehlar, Heytex, Sioline Thickness of normal fabric: 1 mm Thickness of transparent fabric: 2mm Manually Operated Optional: It can be operated with UPS in case of power eut Sides struts, lower parts, wind rails, and drums are aluminum. Sides of the upper parts are coated with galvanize. Winding box is 1311 galvanized. Reducer box Fast PVC door motor set (Temporiti-ITALY) DH-14 Door controller Pepperl fuchs safety photocell Rovioly Limit system
PVC Rapid Roll Up Door, high speed roll up doors, PVC fast rolling doors SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , http://www.hongfahss.com
Shredwell RG series double shaft tire crusher is specialized designed as fine grinder in tire shredding process, the end product after our granulation process will be 99.9% fiber free rubber crumb, size will be around 1-5mm.
Â
More Details:
Shredwell RG series double shaft tire crusher is the third step in the whole tire recycling process. At this step, wire free mulch (10-20mm rubber) is processed from rasper into the granulator, which grinds further into 1-5mm granules. The granules are rescreened and re-circulated until the desired size is reached. During the crumb rubber granulation process, 99.9% of the fiber is removed.
Â
The double shaft tire crusher has an adjustable knife clearance optimizing the cutting function. The knives are not only easy to access and change, but can also be reground on a "flat-bed" grinder. Exchangeable wear parts give you a tough machine. Screens with different hole sizes available to ensure a more flexible production.
1. Technical Specification of Tire Shredder
Machine
RG135
RG90
RG45
RG37
Motor Specification
Electric-
SiemensElectric-
Siemens  Electric-Siemens
 Electric-Siemens
Power
 135Kw
90Kw
 45Kw
 37Kw
Voltage
as per request
 as per request
 as per request
 as per request
Cutting Chamber L*W(mm)
1080*1600
745*1200
580*1000
580*800
DimensionsL*W*H(mm)
2350*2810*4330
2150*2250*2950
1770*1900*2450
1770*1660*2400
Equipment Weight
9700Kg
7600Kg
4300Kg
 3650Kg
Hopper OpeningL*W*H(mm)
1050*1550*1180
899*1450*1160
600*990*920
600*790*920
Capacity
1.5-2T/H
1.5-0.8/H
0.8-0.5T/H
0.5-0.3T/H
Final Product
 1-6mm
 1-6mm
 1-6mm
 1-6mm
2.Service
Pre-sale support
*Shredwell is composed of experienced specialists, our sales are engineers too, we will offer a suitable solution according client's requirements in time and 24 hours service is probided.
*On-site inspection
After-sale service
*Production process follow up, on-processing products' pictures and technical report are supplied regularly to make sure the contracted production schedule.
*Shredwell skilled technicians are available to assist with onsite installation, commissioning & training on request. This will enable customers to optimize the performance of their new plant. Customers will be briefed on all aspects relating to operation and maintenance by a Shredwell technical. Dimensional drawings together with service requirements will be provided to delivery of the double shaft tire crusher which make time for our customer to prepare the site and commence production in time.
Technical support
*Shredwell double shaft tire crusher enough hardware resource especially for large-scale production lines, clients can carry out installation, commissioning and acceptance before delivery.
3. Delivery &Shipping for double shaft tire crusher
1.A layer of plastic wraps to protect machine from duct, moisture and corrosion.
2.Wooden case is used as the outside package. Or according to the customer requirements.
3.Excellant logistic team to guarantee the cutter to be safely shipped to customer warehouse, no extra fee on export or import on custom.
4.Company Introdution
Wuxi Shredwell Recycling Technology Co.,Ltd is an integrated enterprise that is committed to developing, designing, manufacturing, selling and installing recycling machinery. Our double shaft tire crusher is based on self-owned intellectual property and has advanced European and American technology.
Shredwell has now been in the shredding and recycling industry for more than 10 years. Our engineering team has around 15 years experience in designing and manufacturing shredding and recycling systems for scrap tires,scrap metal,waste wood,plastic...Our workforce has more than 5Â years experience in manufacturing shredding machinery.Our company has advanced technologies, an experirenced workforce and excellent innovative management systems designed to manufacture safe, energy-saving, stable and reliable shredding machine systems.
Shredwell is located in Wuxi, China, covering an area of more than thirty thousand square meters, and has a modernized technology center and all kinds of processing and testing equipment with more than 100 experienced staff including over 30 professional engineers. Our main focus is to provide our customers cost-effective tire recycling system, metal recycling system, wood recycling system,e-waste recycling system, solid waste recycling system etc.
Our experienced after-sales service team can ensure the most timely installation, testing and training in the customer's workshop. Our mission is to provide our customers the best recycling solutions with high quality service and technology.
Â
5.FAQ for double shaft tire crusher
1)  Are you a factory or trade company?
We are professional recycling shredder factory with the modernized management and quality control system, experienced production team, advanced manufacturing and processing facility. Export proportion around 50%. .
2) How can IÂ trust your company?
a. modernized management and quality control system, experienced production team, advanced manufacturing and processing facility.
b. famous brand component as our standard configuration, like Siemens Motor, Tongli or SEW reducer, Siemens PLC and Schneider component. All parts processing by CNC machining to warranty the precision.
c. Assessed by third party-national test centre. national patents for all equipment, also CE, ISO.
d. Welcome to inspect anytime. We are near to Shanghai airport.
e. About the machine, we do much better on:Wear plates, seals, structure design, pressure head.
3) How about the test running &Â installation?
Before the order, welcome you to come to testing all machines in our factory, we have ready machines all the time.
Before shipping out your machines, we will invite you to come to test your machines, when you are satisfied; we start to pack and delivery.
We will send our enginner team(At least one mechanical engineer and one electrical engineer) to your country to help you to install the machine, and commission as well as training your workers.
4) Any warranty?
Under the proper usage, 1-3 year for whole machine.
5)Â Â Is your price competitive?
Only good quality machine we supply. Surely we will give you best factory price based on superior product and service.
Â
We are professional in designing and manufacturing shredder and recycling system for more than 10 years. Our systems are installed all over the world including USA, Poland, South Africa, Italy, India, Israel, Japan, America, Ukraine etc.
Shredwell RG series double shaft tire crusher is specialized designed as fine grinder in tire shredding process, the end product after our granulation process will be 99.9% fiber free rubber crumb, size will be around 1-5mm.
Â
More Details:
Shredwell RG series double shaft tire crusher is the third step in the whole tire recycling process. At this step, wire free mulch (10-20mm rubber) is processed from rasper into the granulator, which grinds further into 1-5mm granules. The granules are rescreened and re-circulated until the desired size is reached. During the crumb rubber granulation process, 99.9% of the fiber is removed.
Â
The double shaft tire crusher has an adjustable knife clearance optimizing the cutting function. The knives are not only easy to access and change, but can also be reground on a "flat-bed" grinder. Exchangeable wear parts give you a tough machine. Screens with different hole sizes available to ensure a more flexible production.
1. Technical Specification of Tire Shredder
Machine
RG135
RG90
RG45
RG37
Motor Specification
Electric-
SiemensElectric-
Siemens  Electric-Siemens
 Electric-Siemens
Power
 135Kw
90Kw
 45Kw
 37Kw
Voltage
as per request
 as per request
 as per request
 as per request
Cutting Chamber L*W(mm)
1080*1600
745*1200
580*1000
580*800
DimensionsL*W*H(mm)
2350*2810*4330
2150*2250*2950
1770*1900*2450
1770*1660*2400
Equipment Weight
9700Kg
7600Kg
4300Kg
 3650Kg
Hopper OpeningL*W*H(mm)
1050*1550*1180
899*1450*1160
600*990*920
600*790*920
Capacity
1.5-2T/H
1.5-0.8/H
0.8-0.5T/H
0.5-0.3T/H
Final Product
 1-6mm
 1-6mm
 1-6mm
 1-6mm
2.Service
Pre-sale support
*Shredwell is composed of experienced specialists, our sales are engineers too, we will offer a suitable solution according client's requirements in time and 24 hours service is probided.
*On-site inspection
After-sale service
*Production process follow up, on-processing products' pictures and technical report are supplied regularly to make sure the contracted production schedule.
*Shredwell skilled technicians are available to assist with onsite installation, commissioning & training on request. This will enable customers to optimize the performance of their new plant. Customers will be briefed on all aspects relating to operation and maintenance by a Shredwell technical. Dimensional drawings together with service requirements will be provided to delivery of the double shaft tire crusher which make time for our customer to prepare the site and commence production in time.
Technical support
*Shredwell double shaft tire crusher enough hardware resource especially for large-scale production lines, clients can carry out installation, commissioning and acceptance before delivery.
3. Delivery &Shipping for double shaft tire crusher
1.A layer of plastic wraps to protect machine from duct, moisture and corrosion.
2.Wooden case is used as the outside package. Or according to the customer requirements.
3.Excellant logistic team to guarantee the cutter to be safely shipped to customer warehouse, no extra fee on export or import on custom.
4.Company Introdution
Wuxi Shredwell Recycling Technology Co.,Ltd is an integrated enterprise that is committed to developing, designing, manufacturing, selling and installing recycling machinery. Our double shaft tire crusher is based on self-owned intellectual property and has advanced European and American technology.
Shredwell has now been in the shredding and recycling industry for more than 10 years. Our engineering team has around 15 years experience in designing and manufacturing shredding and recycling systems for scrap tires,scrap metal,waste wood,plastic...Our workforce has more than 5Â years experience in manufacturing shredding machinery.Our company has advanced technologies, an experirenced workforce and excellent innovative management systems designed to manufacture safe, energy-saving, stable and reliable shredding machine systems.
Shredwell is located in Wuxi, China, covering an area of more than thirty thousand square meters, and has a modernized technology center and all kinds of processing and testing equipment with more than 100 experienced staff including over 30 professional engineers. Our main focus is to provide our customers cost-effective tire recycling system, metal recycling system, wood recycling system,e-waste recycling system, solid waste recycling system etc.
Our experienced after-sales service team can ensure the most timely installation, testing and training in the customer's workshop. Our mission is to provide our customers the best recycling solutions with high quality service and technology.
Â
5.FAQ for double shaft tire crusher
1)  Are you a factory or trade company?
We are professional recycling shredder factory with the modernized management and quality control system, experienced production team, advanced manufacturing and processing facility. Export proportion around 50%. .
2) How can IÂ trust your company?
a. modernized management and quality control system, experienced production team, advanced manufacturing and processing facility.
b. famous brand component as our standard configuration, like Siemens Motor, Tongli or SEW reducer, Siemens PLC and Schneider component. All parts processing by CNC machining to warranty the precision.
c. Assessed by third party-national test centre. national patents for all equipment, also CE, ISO.
d. Welcome to inspect anytime. We are near to Shanghai airport.
e. About the machine, we do much better on:Wear plates, seals, structure design, pressure head.
3) How about the test running &Â installation?
Before the order, welcome you to come to testing all machines in our factory, we have ready machines all the time.
Before shipping out your machines, we will invite you to come to test your machines, when you are satisfied; we start to pack and delivery.
We will send our enginner team(At least one mechanical engineer and one electrical engineer) to your country to help you to install the machine, and commission as well as training your workers.
4) Any warranty?
Under the proper usage, 1-3 year for whole machine.
5)Â Â Is your price competitive?
Only good quality machine we supply. Surely we will give you best factory price based on superior product and service.
Â
Double Shaft Scrap Tire Crusher for Waste Tyre Recycling
Model NO.: TS2400
Power: 135kw
Double Shaft Tire Crusher Input: End of Life Tire
Input Size: Diameter Less Then1800mm
Double Shaft Tire Crusher Output: Rubber Crumb
Output Size: 1-6mm
Capacity: 1.5-2t/H
Control System: Siemens PLC and Schneider Component
Color: Green and Orange
Auxiliary Machine: Conveyer
Trademark: Shredwell
Transport Package: Double Shaft Tire Crusher with Film in Box
Specification: as customized size
Origin: China
HS Code: 8477800000
Model NO.: TS2400
Power: 135kw
Double Shaft Tire Crusher Input: End of Life Tire
Input Size: Diameter Less Then1800mm
Double Shaft Tire Crusher Output: Rubber Crumb
Output Size: 1-6mm
Capacity: 1.5-2t/H
Control System: Siemens PLC and Schneider Component
Color: Green and Orange
Auxiliary Machine: Conveyer
Trademark: Shredwell
Transport Package: Double Shaft Tire Crusher with Film in Box
Specification: as customized size
Origin: China
HS Code: 8477800000
We are professional in designing and manufacturing shredder and recycling system for more than 10 years. Our systems are installed all over the world including USA, Poland, South Africa, Italy, India, Israel, Japan, America, Ukraine etc.