Antioxidant 225,Antioxidant 225 For Polyolefin,Antioxidant 225 For Olefin-Copolymers,Antioxidant B225 For Engineering Plastic SHANDONG MINGDE CHEMICAL CO.,LTD. , https://www.mingdechemicals.com
Computer network conference call function operation:
Can be used as a computer's external microphone and speaker equipment, but also for computer network teleconferencing.
1. Prepare an omnidirectional microphone before installation for computers with Windows 2000/Windows XP/Windows Vista/Windows 7 and Mac OSX operating system. Require that the USB interface is USB1.1 or higher (USB 2.0 is recommended), and connect to the Internet. The computer has been installed with instant messaging or VoIP software packages (such as QQ Voice, skype, MSN, uucall, etc.) with Internet telephony.
The USB data cable of this device is plug-and-play, no need to install additional drivers.
2. Installation before use As shown in the figure, first plug one end of the supplied USB data cable into the USB socket of the unit, and the other end into the USB socket of the computer. At this time, the USB driver will be automatically installed on the computer. At the same time, the computer also provides power to the unit and is ready for use.
Note: * You cannot connect multiple microphone speaker devices at the same time on the computer including this unit * Connect the omnidirectional microphone directly to the computer. Connecting via a USB hub may cause operational problems.
3. Call Start the software with Internet phone function on the computer and follow the software instructions to operate the phone function. After the Internet phone is connected, you can make an online phone conference with the other party.
4, speaker volume size adjustment During the conference call, if the speaker volume is too small or too large, you can first press the unit's "volume increase" or "volume down" button, adjust the appropriate volume to meet the requirements, if Not enough, you can adjust the speaker volume on your computer.
5, the microphone to send the volume adjustment in the conference call, if the other party to hear the sound is too small or too large, you can first ask the other side to adjust the size of the receiving volume to meet the requirements, if not enough, you can adjust the computer's microphone The volume of the sending voice.
6. Microphone mute During the conference call, you want to mute your voice, please press the host's "Mute Microphone" button. At the same time, the host's microphone mute indicator will light, and the enabled microphone indicator will also be off. At this time, you can only hear the other party's voice, but the other party can't hear your voice; if you want to cancel the mute, please press the host's “microphone mute†button again, and you can immediately resume the call. The host's microphone mute indicator will turn off and the enabled microphone indicator will light.
7. Selecting the direction of the microphone pickup When the power is turned on by default, three microphones are pressed. Press the “MICZONE†button in this order, and the microphone will pick up the direction of the microphone in sequence. Press this button for the first time, the second time and the third time. A single microphone will be turned clockwise from left to right, continue to press, and return to the original process.
The microphone that is enabled in the three microphones, the corresponding microphone indicator will light.
Note: When the microphone is muted, the microphone cannot be enabled. Please unmute and turn on the microphone.
8. Loudspeaker mute During the conference call, press the “speaker mute†button to temporarily turn off the speaker's sound. At this time, the speaker mute indicator will light; if you want to open the speaker's sound, please press this button again. The speaker mute light goes out.
9, the end of the conference call In accordance with the computer network phone software operating methods, hang up with the other party's call, the end of the Internet teleconferencing.
Note: Due to the abnormal function during use, please re-plug the USB data cable once, and make the unit power off and restart.
Application of Omnidirectional Microphone in Computer Network Teleconference
The omnidirectional microphone is a portable conference phone product that can not only perform high-quality Internet telephony conferences on the Internet through the interface of the computer, but also can use the headphone jack as a speaker and hands-free microphone device for a wireless mobile phone. , conduct high-quality wireless mobile phone conferences. Its classic shape is great for carrying. The microphone pickup direction can be selected according to the conference scene and is suitable for use in conference rooms and offices.