Dongfeng Tianjin Guowu compressed garbage truck environmental protection exemption to publicity

\

\

\

Dongfeng Tianjin Guowu compressed garbage truck chassis configuration: 4×2 drive, D530 flat head one row semi-standard top cab, Dongfeng Cummins ISD180 50 engine (WHTC), wheelbase 4500mm, 860mm wide frame, resistance heating cold starter , all steel 160L fuel tank, fuel tank lock (three locks one), electronic accelerator pedal and switch, two-stage fuel filter series (complete vehicle level, engine level), muffler side exhaust port orientation Side blow, Φ395mm push-type diaphragm spring clutch, Dongfeng 6-speed DF6S900 gearbox (head speed ratio 7.967), the highest grade is overspeed, 4.5T front axle, 9T single-stage deceleration rear axle, main reduction ratio 5.286, flange Part of the power (take power on the gearbox) power take-off, frame longitudinal section size 250 × 80 × [7 + 4] mm, leaf spring number 7 / 9 + 6, 9.00R20 radial tire, automatic adjustment arm , Dongfeng Technology ABS (4 channels), semi-floating cab suspension, hydraulic mechanical flip, channel type instrument panel, air conditioning, no cruise system, remote throttle and PTO interface, remote throttle switch, no device, pre- Reserved interface - for the 12 version of the drive recorder and Beidou terminal.

[Main technical parameters of Dongfeng Tianjin Guowu compressed garbage truck]

Product trademark Chusheng

Announcement Lot 282

Product Name CSC5161ZYSD5 Compressed Garbage Truck

Product No.ZM4FA53S01G

Total mass (Kg) 15800

Tank volume (m3)

Rated load mass (Kg) 5350, 4850

Dimensions (mm) 8650, 8850, 8900 × 2480 × 3180

Curb weight (Kg) 10255, 10755

Cargo size (mm) × ×

Rated passenger (person)

Quasi-trailer total mass (Kg)

Number of passengers in the cab (person) 3

Load mass utilization factor

Approach angle / departure angle (°) 20/10

Front overhang / rear overhang (mm) 1430/2720

Number of axes 2

Wheelbase (mm) 3800, 4200, 4500, 4700, 5000

Axle load (Kg) 5800/10000

Maximum speed (Km/h) 98

Others 1. The car can be equipped with square or curved car; the working device can be optional. When the working device is selected, the shape length/back extension (mm)/reading quality (kg) corresponds to: 1 no loading device and 2 Fully sealed cover device: length 8650/0/10255; 3 bucket changing device: 8850/200/10255; 4 dumping device: 8900/250/10755; 5 swing arm device: 8850/200/10755. 2. Side protection is cold Curved steel / Q235, bolted; rear protection replaced by special equipment. 3. Optional cab with chassis, only 4500mm wheelbase; 4, fuel consumption declaration value of 27.3, 27.4, 27.6 corresponding engine is ISD210 50, ISD190 50, ISD180 50; the car should be equipped with a satellite positioning function of the tachograph . ABS model/manufacturer: 3631010-C2000, 4460046440/ East Cochnoor Commercial Vehicle Brake System (Shiyan) Co., Ltd., WABCO Automotive Control Systems (China) Co., Ltd. (This article comes from Xiagong Chusheng)

Water Tube Biomass Steam Boiler

Water Tube Biomass Steam Boiler Features


1. Independent air chamber structure makes the air volume adjustment between the air chambers sensitive and reliable, even air distribution.

2. Boiler proper adopt membrane wall structure, which increased the boiler heating area. Tight sealing avoid wind leakage, low the heat loss, increase the boiler thermal efficiency.

3. 1-8 tph boiler is package type delivery from factory, which can greatly shorten the installation time.

Water Tube Biomass Boiler,Water Tube Biomass Fired Boiler,Water Tube Biomass Fired Steam Boiler,Industrial Water Tube Biomass Boiler,Automatic Water Tube Biomass Boiler

Henan Yuanda Boiler Co., Ltd. , https://www.industrysboiler.com