In recent years, we have seen the rapid development of science and technology in our great motherland. This made me feel extremely proud for me as a Chinese. With the advancement of technology and the progress of people, we will join the Chinese cutting machine trading network to make progress together. Join the hotline, we look forward to your call. Details:/ Different Dia Aluminum Eoe,Easy Open End Eoe,Gold Aluminum Easy Open Ends,Alu Easy Open Ends CHANGZHOU AVEC PACKING TECHNOLOGY CO., LTD , https://www.avecintl.com
In the use of CNC cutting machine operator should understand the structure of the device is familiar with the principle of operation in accordance with the use of regulations, before use to check the cutting machine running on the guide rail is stable, the cutting table does not exist cutting waste, horizontal cross beam limit is reliable, adjust The meshing condition of the longitudinal and transverse gears and racks is ensured to be in a good condition. The air supply hoses and connectors are in good condition. Check whether the tempering preventer and each valve are damaged. If they are damaged, they must be exchanged.
Before use, check whether the gas source is leaking. If the flame suddenly goes out during the cutting process, immediately close the gas valve, heating oxygen and cutting valve. After finding out the reason and handling it, it can be re-ignited. The cutting machine must not leave during the movement and work. After the cutting is completed, move the cutting machine to the top of the guide rail, then turn off the power supply and the total air supply. When using, be sure to follow the specified operation. Do not use blindly so as not to damage the equipment.
CNC plasma cutting machine has high cutting speed, high precision, and a wider range of use. It is deeply favored by users. At present, the domestic CNC cutting machine technology is close to the international level, but the operation ability of enterprises still needs to be improved. There is no automatic on the CNC system. The cutting process and cutting parameters database can only be operated by experience. Manual cutting machines cannot automatically perforate and cut, and the efficiency is naturally low. When cutting, the cutting method is too simple, and the individual parts must be perforated and cut without cutting, and the efficient cutting methods such as co-edge, borrow-edge, and bridging are not used, so that the cutting efficiency of the cutting nozzle is low.
With the increase of the usage time, the CPU and hard disks of the system may be heated to make the system unstable, the fans may be worn, or the hard disk may vibrate or be infected with viruses. The operating system may be defective, resulting in cutting errors and affecting the cutting quality. The software of the nesting software is not used. Calling a part on the control system stops manual programming and stops part of the cutting, resulting in wasted time and reduced cutting efficiency.
[I can't think of it. I can't do it. Change your style from now on. Opening the Chinese cutting machine trading network is equivalent to opening up your wealth road, come and click on the website now! 】