Second, swing arm garbage truck piston rod "crawling" or "creep" 3. Lifting and lifting of the swing arm garbage truck hydraulic cylinder 1. Cause: Damage to the piston seal Solution: Check and replace the seal 2. Reason: System pressure is too low (safety valve misalignment) Solution: Check and adjust the pressure of the safety valve 3 Cause: System pressure is too low (serious leak) Solution: Check, replace components 4. Cause: Oil pump damaged Solution: Check, replace the oil pump 5. Cause: Insufficient hydraulic oil in the tank Solution: Check, add hydraulic oil 6. Reason: filter Oil blockage solution: check, replace filter IV. Swing arm outside the garbage truck 1. Cause: Damage to the seal solution: repair, replace the seal ring 2. Cause: Damage to the oil seal surface: Check and replace the oil pipe The users of the users who purchase the swing arm garbage truck must strictly follow the maintenance and repair of the chassis of the vehicle; regularly check the connection points and lubrication points of the vehicle, eliminate the loosening phenomenon of the fasteners and ensure good lubrication; each year the power take-off is required. , gearbox for a comprehensive cleaning, inspection, maintenance.
Larger size workpiece require larger capacity and increased rigidity in order to support heavier table loads. TipTop's Bridgecenter Double Column Machining Centers are designed for extreme cutting capacity, offering the benefits of high speed and high torque spindle options, spacious work envelopes, and patented double column bridge type design. Standard linear scale feedback and taper spindle configurations make it suitable for the mold industry where high levels of accuracy are needed in roughing and finishing large cavities.
Gantry Machining Center,Gantry Type Machining Centers,Bridgecenter Double Column Machining Centers,Gantry VMC Suzhou Tiptop Machinery Technology Co. Ltd. , https://www.sailingcnc.com
1.Cause: The air is mixed into the hydraulic cylinder or the hydraulic oil Solution: Operate the hydraulic cylinder to expand and contract, eliminate air
Swing arm garbage truck fault solution
First, the swing arm garbage truck hydraulic cylinder piston rod oil leakage 1. Reason: damage to the cylinder seal solution: check the guide sleeve, replace the seal ring 2. Reason: scratch the surface of the piston rod to solve: use fine sandpaper to correct or replace parts