Indoor Door Crane (LDA model)

Model NO.: LDA
Moving Type: Wheel
Installation: Assembled
Certification: ISO9001: 2000, CE
Condition: New
Weight Overload Protection Device: Include
Voltage Lower Protection Function: Include
GB/T 24001-2004 Idt ISO14001: 2004: Pass
Sandblast: Could Supply
GB/T 19001-2000 Idt ISO 9001: 2000: Pass
Limited Switch: Include
Painting Color: According to Your Demand
Current Overload Protection System: Include
GB/T 28001-2001, Ohsas18001: 1999: Pass
Electric Hoist Double Limit: Include
Trademark: KUANGYUAN
Transport Package: Packed by Plywood Crate and Plastic Woven Cloth.
Specification: China National standard
Origin: Xinxiang, Henan Province
HS Code: 84261120
Single girder overhead bridge crane
These cranes are equipped with electric hoist and widely used in workshop, warehouse, and material stores and so on.

Safety feature:
Weight overload protection device, Top quality long time bearing polyurethane materials buffer, Crane traveling limit switch, Voltage lower protection function, Emergency stop system, current overload protection system and so on!

Control method:
Pendent line with press button or remote control or both

Design and construction rules:
All the standards which is required for the crane is the Chinese standard

Crane girder:
The crane girder is of welded girder construction. This result in lower dead weight with a high degree of vertical and horizontal rigidity and small wheel loads being transmitted to the crane runway!

Painting:
Primer and finishing paint
Color: According to your demand.
Average thickness: About 100 microns.
Lifting capacity (T) 1, 2, 3, 5, 10T 16, 20T
Span(M) 7.5-22.5M
Crane travelling mechanism Travelling speed(m/min) 20 30 45 60 75 20 30 45 60 75
Reducer ratio 58.78 39.38 26.36 19.37 15.88 58.78 39.38 26.36 19.37 15.88
Motor Model ZDY21-4 ZDY21-4 ZDY122-4 ZDY131S-4 ZDY112L1-4
Power(kw) 2× 0.8 2× 1.5 1.5× 2 2.2× 2 2.2× 2
Rotation (m/min) 1380 1380
Lifting mechanism
(electric hoist)& electric hoist travelling mechanism
Electric hoist model CD1/MD1 MD1/HC
Lifting speed (m/min) 8, 8/0.8 7, 7/0.7 3.5 3.5/0.35
Lifting height (m) 6, 9, 12, 18, 24, 30 12, 18, 24, 30
Travelling speed (m/min) 20(30) 20(30)
Motor Taper Squirrel-cage type Taper Squirrel-cage type
Work duty A3-A5
Power supply 380V 50HZ three phase (By your demand)
Wheel diameter 270mm 370mm
Width of trail 37-70mm 37-70mm

Steel Grit

Steel Grit,Metal Grit Blasting,Steel Grit Blasting Abrasive,Cast Steel Grit

JAR HING PRODUCTS.,LTD , https://www.jarhingsand.com