Recently, Beijing Hyundai Motor Co., Ltd. filed a recall plan with the AQSIQ in accordance with the requirements of the Regulations on the Management of Defective Automobile Product Recalls. Recall batches/involving units: recalled some of the 2009 to 2010 i30 vehicles produced during the period from May 13, 2009 to April 30, 2010, totaling 142 vehicles. Start recall time: from May 18, 2015. Reasons for recall: Some vehicles in this recall range are too sensitive due to the electronic power steering (MDPS) sensor diagnostic logic. The electronic signal is unstable when the vehicle starts. In this state, the electronic signal cannot reach the normal standard, and the sensor is misdiagnosed as a fault. The power steering (MDPS) warning light is on, and problems such as heavy steering may occur, posing a safety hazard. Solution: Beijing Hyundai Motor Co., Ltd. will upgrade the ECU program free of charge for vehicles within the scope of the recall to eliminate potential safety hazards. Beijing Hyundai Motor Co., Ltd. will notify the relevant owner through the dealer. Estimated length of repair: about half an hour. It is recommended that the relevant owner pays the relevant 4S shop for repair in time. If the recall claim period is missed (usually 6 months or 1 year), the post-maintenance will be self-funded. Manufacturer's customer service phone: Users can call the customer service hotline 400-800-1100 for consultation. Query by VIN (Vehicle Identification Number) whether it is in the scope of recall: Beijing Hyundai i30 recall range VIN code query.
The Pressure Vessel Series is a collection of vessels designed to contain fluids or gases at high pressure. These vessels are used in a variety of industries, including chemical processing, oil and gas, and power generation. The vessels are typically made of steel or other high-strength materials, and are designed to withstand the extreme pressures and temperatures that they are exposed to.
One of the key features of the Pressure Vessel Series is their ability to safely contain high-pressure fluids and gases. This is achieved through a combination of design features, such as thick-walled construction, reinforced seams, and pressure relief valves. These features help to ensure that the vessel can withstand the high pressures and temperatures that are present inside, while also providing a safety mechanism in case of a failure.
Another important aspect of the Pressure Vessel Series is their versatility. These vessels can be used for a wide range of applications, including storing and transporting gases and liquids, as well as processing raw materials into finished products. They can also be customized to meet specific industry needs, with options for different sizes, shapes, and materials.
In addition to their functional benefits, the Pressure Vessel Series also offers economic advantages. By allowing for the safe and efficient storage and transport of high-pressure fluids and gases, these vessels help to reduce waste and increase productivity. They also provide a cost-effective solution for industries that require high-pressure containment, as they are often less expensive than alternative solutions.
Overall, the Pressure Vessel Series is an essential component of many industrial processes. From chemical processing to power generation, these vessels provide a safe, reliable, and cost-effective solution for high-pressure containment. With their versatility and durability, they are sure to remain an important part of industrial operations for years to come.
Pressure Vessel Series,Tubular Heat Exchangers,Pressure Vessel,Industrial Tower Equipment Jiangsu Stord Works Ltd. , https://www.stordworks.cn