DBZ-2B intelligent weight transmitter features

With the continuous development of transmitter technology, smart weight transmitter joint program can get more accurate data, then what are the characteristics of smart weight transmitter, the following Xiaobian to introduce specific to everyone.

DBZ-2B intelligent weight transmitter has the following features:
(1) The instrument is intelligent, and most of the functions and performances are realized or guaranteed by the software system, which reduces the number of hardware and thus increases the reliability of the instrument.

(2) Adopting triple-inclined integration technique, the internal code of analog-to-digital converter (A/D) is up to 500,000 yards. The D/A circuit adopts pulse width modulation technology with a resolution of 1/10000, thus ensuring the conversion of the transmitter. Accuracy.

(3) Wide input signal range, digital zero adjustment technology and arbitrary selection function with indexing, indexing and constant, full-scale output signal can be obtained without switching and debugging, and the user selects the transmitter, weighing sensor and design. Heavy mechanical systems provide convenience.

(4) The introduction of automatic digital calibration technology for electronic scales has made it very convenient for users to perform on-site debugging. In addition, since the transmitter has a very small non-linearity error, even if the user loads 20% of the weight, it can be calibrated automatically.

(5) It has digital withering and automatic zero tracking and zero software hold detection function. It can maintain the zero position of the scale and improve the weighing accuracy in the industrial field with frequent voltage fluctuations and harsh conditions.

(6) According to the user's needs, it has a secondary fixed value control function and an advance amount automatic correction function.

(7) It has automatic zero adjustment function. After each batch of ingredients, it can automatically zero the non-zero condition caused by poor mechanical reproducibility and sticking material, and the auto zero adjustment range can be arbitrarily set.

(8) It has full-plate setting index number, division value, decimal point position, baud rate setting and fully automatic digital calibration function. The number of divisions is stored in the EEPROM with hardware protection.

(9) With dynamic detection, stabilization processing and overload alarm function.

(10) Bidirectional serial communication with the host computer RS-232 or RS-422 or R5-485 or 20mA current loop.

(11) A/D internal code display (check sensor, amplifier, A/D is good or bad) and operation error alarm function.

(12) The bidirectional isolation technology of the input A/D and output D/A and the single-chip microcomputer and the special software monitoring circuit are adopted, and the anti-interference capability is strong, and the program has a self-start recovery function.

(13) According to the user's needs, it can increase the setting or discharge accumulation function, and the accumulated value power-off protection.

The above is the characteristic of DBZ-2B intelligent weight transmitter that Xiaobian provides for everyone. We can use the above content as a reference. Through the above understanding, the intelligent weight transmitter has the features of high resolution and strong flexibility. Features of strong adaptability, high accuracy, ease of design and manufacture, simple use and maintenance features, high reliability and high stability, centralized control, and flexibility.