Suspended Manual Discharging Circular Electromagnetic Separator Mc03-60L

  • Model NO.: MC03-60L
  • Voltage: 220V
  • Material: Casting Steel
  • Certification: ISO9001:2008, ISO9001:2000
  • Warranty: 2 Years
  • Customized: Customized
  • Installation: Hanging or Frame Fixing
  • Wire Winding Material: Aluminum or Copper
  • Rated Voltage: DC-220V/110V
  • Working Temperature: Below 200 Degree
  • Hanging Height: 180 mm
  • Trademark: ZN-Magnet
  • Specification: Magnetic Separator
  • HS Code: 85059010
  • Type: Magnetic Separator
  • Weight: <1T
  • Material Feature: Oil Resistant
  • Energy Saving: Energy Saving
  • Color: Red
  • Condition: New
  • Shape: Circular/Round
  • Usage: Ferror Material Removing
  • Insulation Degree: H
  • Diameter: 600 mm
  • Suiting Belt Width: 500 mm
  • Transport Package: Ply-Wooden Box
  • Origin: China
Complete set of Manual-Discharging Magnetic Separator Set
Circular Shape

PART I: Technical Data:
Rated voltage DC-220V, duty cycle TD-60%, steel temperature: below 150 degree
 
Model MC03-60L
Erection Height 180 mm
Suiting Belt Width 500 mm
Diameter 600 mm
Voltage DC-110 V
Power 1.15 kW
Mass 318 kg
Magnetic Induction ≥ 65 mT
Material Thickness ≤ 100 mm
Applicable Belt Speed ≤ 2.5 m/s

Suspended Manual Discharging Circular Electromagnetic Separator Mc03-60L

PART II: WHAT IS SEPARATOR
The magnetic separator consists of a large rotating drum that creates a magnetic field. Materials enter the separator and fall out through mesh at the base if they are not magnetic. Sensitive particles respond to the magnetism and cling to the sides of the container. The drums can be used in continuous processing of materials as they move along the assembly line, or in batch jobs, where a single batch is run through all at once.
One common use for magnetic separation is to remove unwanted metal from a shipment of goods. Magnetic separation can help companies keep materials pure, as well as remove things like nails and staples that may have crept into a shipment. The equipment can also purify ores, separate components for recycling, and perform a variety of other tasks where metals need to be separated or isolated. Equipment can range in size from a desktop unit for a lab that needs to process small amounts of material to huge drums used in scrap metal recycling centers.
 
It can be combined with conveyers such as belt conveyer, vibration conveyer and electromagnetic vibration feeder and remove 0.1~35 kg materials, which plays an important role in improving the quality of material, recovery, and equipment protecting and can be put into operation in harsh working conditions with no fault occurs even after a rather long time running. This series is now widely applied in cement industry, thermal power industry, metallurgy industry, mine industry, ceramic industry, medical industry, glass industry, paper-making industry, building material industry, food industry, tobacco industry and ore industry, etc.
 
Specifications:
 
1. Optimized design by computer, so the structure is reasonable, energy consumption is low, and the performance is stable.
2. Distribution of magnetic field is scientific and reasonable with a deep penetration and a strong attraction force
3. The excitation coils have gone through some special technical treatment, which improves the electrical and mechanical performance like low rise in temperature, insulated and good heat-resisting.
4. Installation is easy, maintenance is simple and service life is long.
5. Each technical data meets the standard JB/T 7689-2004.

PART III: Installation Indication
 Suspended Manual Discharging Circular Electromagnetic Separator Mc03-60L
 As you could see from the above picture, there has two installation ways for the separator: on the head or on the middle of conveyor.
 
But no matter you install on which part of the conveyor, you need to make sure:
  1. The separator is on the right top of conveyor
  2. The separator should be straightly vertical of conveyor
  3. Make sure there has lifting point on the top of conveyor, we could provide you adjustable lifting chain. Or you could have a frame to fix the separator above the conveyor.
  4. This type of separator is of manual discharging type, you need to remove the iron parts attached on separator by workers with non-magnetic Scraper Plate.
  5. You could check and confirm if you in need Non-magnetic Roll or not.
  6. For the manual discharging type, you could also need to check with your customer if you need travelling car or not.
 
PART IV: Package
Ply-wooden Board Box with Iron Frame Inside
Suspended Manual Discharging Circular Electromagnetic Separator Mc03-60L

PART V: Our Service
Quick Response:
Enquires by email, fax or instant message is high appreciated.
Your enquiry will be replied by email & fax within 24 hours.
Please feel free to call us at any time for any questions or documents wanted.
 
Pre-sales Service:
All of our technical proposal will be offered by our senior engineers, based on your request.
Full production process will be shown to you by photos & video during manufacturing.
 
Package & Transportation:
Package: Ply-wooden Box, with fixed iron frame inside.
All available shipping ways could be applied, by courier, air or sea.
Appointed shipping company or our own forwarders all could be used in shipment.
Full-way tracking the cargos for you till the goods arrive.
 
After-sales Service:
After sales service and technical support could be offered within guarantee period, Site maintenance could be also provided.
 
 
NEVER HESITATE TO CONTACT ME:
Yueyang Zhong Nan Electromanet Technological Co., Ltd
www.zn-magnet.com
Suspended Manual Discharging Circular Electromagnetic Separator Mc03-60L

Q+T Steel Strips For Putty Knife

Q+T Steel Strips For Putty Knife,Hardened Carbon Steel Strips,Metal Steel Strips For Putty Knife,Hardened Blue Steel Strip

Jiangyin Mitoo Precise Co.,Ltd. , https://www.mitoosteel.com