Matting Agent For Electrophoretic Coatings
Product Description
E-coating – also known as Electrophoretic Painting, Electrocoating,
Electropainting etc. The coating materials (resins, pigments, additives, etc.)
are dispersed in water and held in a bath. The parts to be coated are immersed
in the solution and an electrical current is passed through the bath using the
parts as an electrode.
Silica Paint Matting Agent is a very
fine-grained wax after-treated precipitated silica as white powder.
Characteristics
High Matting Efficiency;
Excellent Transparency;
Easy to Disperse;
Excellent Hand-feeling
Applications:
Mainly used as a high-purity filler for e-coats due to its excellent
suspension behavior and low electrical conductivity.
Matting Agent For Electrophoretic Coatings,E Coating Matting Agent,Electrophoretic Coatings Silica,White Powder Silica Matting Agent Guangzhou Quanxu Technology Co Ltd , https://www.skyelecteflonheater.com
Collection performance of "thiourethane" collector
"Thiourethane" collectors are sulfide ores, which is characterized by selective, less medication, particularly for collecting capability pyrite very weak flotation of ores containing brass and pyrite ore Copper is very effective, and zinc- sulfur separation also has a good effect.
1. When using the "thiourethane" type collector to select Cu, Zn, and S type ruthenium as a laughing substance (but) butyl thiourethane floating Cu, Zn, S ore, with the increase of the pulp pH value, yellow iron The recovery rate of the mine dropped sharply, while the recovery of copper and zinc remained unchanged over a wide pH range, and the grade increased. The results are shown in Figure 1.
(The picture is not available)
Figure 1 Relationship between copper, zinc, sulfur recovery and grade and pH
 Â
It can be seen from Fig. 1 that at pH=10~10.5, better results can be obtained by preferentially flotation of copper from sulfur with "thiourethane" type collector or by preferential flotation of zinc from sulfur. .
2. At lower pH, using (isopropyl) ethionyl ester as a collector can also separate zinc and sulfur. According to the literature, some countries use (isopropyl) ethionate as a collector. At lower pH conditions, zinc and sulfur can also be separated. The test results are shown in Table 1.
Comparison of preferential flotation of sphalerite from pyrite with (isopropyl) ethionamide and isopropyl xanthate :
Preferred flotation sphalerite comparison test   Table 1
Collector name and
Dosage (g / ton)
Tailings
PH value
Zinc concentrate
Note
grade(%)
Recovery rate(%)
※ indicates added
Stone ash
Each test was added with copper sulfate 130 g / ton
(isopropyl)
Ethyl carbamate
Isopropyl xanthate
7.0
7.4
9.9
Zn
Fe
Zn
Fe
9.0
13.6
13.6
50.0
29.2
41.2
3.1
13.2
8.9
87.0
84.6
84.3
5.9
43.9
20.6
From the data in Table 1, the (isopropyl) ethionamide has a weak ability to capture pyrite, and its selectivity is stronger than that of isopropyl xanthate. Therefore, (isopropyl) ethionamide is a better harvest. Agent.
Article 3 of the Liaoning Institute of the non-ferrous metallurgical and other units with sub-Division (isopropyl) ethyl urethane of Hujiayu sulfur mine to do a more in-depth research, and industrial test done, mainly copper mine minerals Chalcopyrite, the main cobalt- containing mineral is a copper-cobalt ore of pyrite (like the same type). They first use (isopropyl) ethionyl ester to preferentially float copper, and copper tailings are selected by the principle flow of xanthate floating cobalt pyrite. The third stage industrial test results and industrial test chemical conditions are shown in Table 2 and Table. 3.
From Tables 2 and 3, the (isopropyl) ethionyl ester chalcopyrite flotation has good selectivity, and the ability to collect pyrite is less than that of xanthate. Therefore, the use of (isopropyl) ethionamide float copper, followed by xanthate float cobalt pyrite, can reduce the content of cobalt in copper concentrate, improve the index of cobalt concentrate. (Isopropyl) acetaminophen is used in a small amount, which is 1/4 of the butyl sulphate, the amount of lime is reduced by half, and the recovery rate is increased by about 14%.
Industrial test conditions Table 2
Test date
Copper selection system
Cobalt selection system
lime
Ding Huang Yao
(isopropyl) ethionamide
Pyridine
Ding Huang Yao
Pyridine
July 14-16
July 17-20
7500
2690
65
-
-
15.35
95
64.16
250
180
220
240
Industrial test results Table 3
Pharmacy
Test date
Processing capacity
(Ton)
Copper selection index
Cobalt index
Raw ore grade (%)
Concentrate grade (%)
Recovery rate(%)
Concentrate grade (%)
Recovery rate(%)
Cu
Co
Cu
Co
Cu
Co
Co
Co
Yellow medicine
(isopropyl)
Ethylthiourethane
July 14-16
July 17-20
764
585
0.711
0.577
0.026
0.025
18.989
18.735
0.113
0.064
95.76
96.17
15.42
7.58
0.288
0.252
56.22
70.34