A pipe cutting machine shear, historically known as a lever shear and sometimes as a crocodile shear, is a metal-cutting shear with a hinged jaw, powered by a flywheel or hydraulic cylinder. Alligator shears are generally set up as stand-alone shears; however, there are types for excavators. They are generally used to cut ferrous members, such as rebar, pipe, angle iron, or I-beams.
Steel Pipes Shear, Iron Pipes Shear, Metal Pipes Shear, Copper Pipes Shear Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-balingmachine.com
Professional quality! This product effectively removes gum, resin, oil, greasy deposits and dirt from carburetors and fuel systems, help improve fuel consumption, improve engine idle and help prevent stalling!
Product description:
Ak-cc5001 carb clean is a fast-acting carburetor and choke cleaner that dissolves carburetor deposits such as sludge, gum and varnish. Designed to maximize carburetor performance, improve fuel system performance and ensure maximum fuel economy.
Features & benefits:
1. Effectively dissolves gum, varnish, dirt and carbon deposits that inhibit
Performance.
2. Fast-acting. Efficient cleaning action.
3. Assures faster starts and smooth idling.
4. Helps restore performance and gas mileage.
5. Extension spray tube included for hard to reach areas.
Shelf life: 24 months
Applications:
Recommended for cleaning automatic chokes, carburetor elements, intake parts and ventilating systems. Suitable for general purpose cleaning of non-painted surfaces.
Areas of use:
Also ideally suited as a solvent, degreaser and cleaner
Directions:
Carburetor and linkage
With ignition off and engine cool, remove air filter and entire exterior surface of carburetor including linkage.
Automatic chokes
With engine off, spray carb & choke cleaner on both ends of choke valve and corresponding
Manifold heat control valve
With engine cold, spray carb & choke cleaner on both ends of heat control valve shaft.
Move counterweight up and down until valve moves freely. If necessary, tap gently with a light
Pcv valves
Disconnect crank case side of pcv valve and, with the engine running, spray carb &
Choke cleaner into open end of valve while working the plunger back and forth.
Important
* if spilled or sprayed on painted surface, wipe off or wash off immediately.
Storage:
Beware: Aerosol is pressurized. Keep away from direct sun exposure and temperatures over 50 ° C. Do not open by force or throw into fire even after use. Do not spray on flames or red-hot objects. Keep containers tightly closed in a dry, cool and well-ventilated place. Please observe the storage instructions for aerosols!
Carburetor & choke cleaner
Professional quality! This product effectively removes gum, resin, oil, greasy deposits and dirt from carburetors and fuel systems, help improve fuel consumption, improve engine idle and help prevent stalling!
Product description:
Ak-cc5001 carb clean is a fast-acting carburetor and choke cleaner that dissolves carburetor deposits such as sludge, gum and varnish. Designed to maximize carburetor performance, improve fuel system performance and ensure maximum fuel economy.
Features & benefits:
1. Effectively dissolves gum, varnish, dirt and carbon deposits that inhibit
Performance.
2. Fast-acting. Efficient cleaning action.
3. Assures faster starts and smooth idling.
4. Helps restore performance and gas mileage.
5. Extension spray tube included for hard to reach areas.
Shelf life: 24 months
Applications:
Recommended for cleaning automatic chokes, carburetor elements, intake parts and ventilating systems. Suitable for general purpose cleaning of non-painted surfaces.
Areas of use:
Also ideally suited as a solvent, degreaser and cleaner
Directions:
Carburetor and linkage
With ignition off and engine cool, remove air filter and entire exterior surface of carburetor including linkage.
Automatic chokes
With engine off, spray carb & choke cleaner on both ends of choke valve and corresponding
Manifold heat control valve
With engine cold, spray carb & choke cleaner on both ends of heat control valve shaft.
Move counterweight up and down until valve moves freely. If necessary, tap gently with a light
Pcv valves
Disconnect crank case side of pcv valve and, with the engine running, spray carb &
Choke cleaner into open end of valve while working the plunger back and forth.
Important
* if spilled or sprayed on painted surface, wipe off or wash off immediately.
Storage:
Beware: Aerosol is pressurized. Keep away from direct sun exposure and temperatures over 50 ° C. Do not open by force or throw into fire even after use. Do not spray on flames or red-hot objects. Keep containers tightly closed in a dry, cool and well-ventilated place. Please observe the storage instructions for aerosols!
High Performance Powerful Carburetor Cleaner
Model NO.: AK-CC5001
Model NO.: AK-CC5001
Carburetor & choke cleaner